2.2: Graphs of Linear Functions
 Page ID
 1420
\( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)
\( \newcommand{\vecd}[1]{\overset{\!\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)
Skills to Develop
 Graph linear functions.
 Write the equation for a linear function from the graph of a line.
 Given the equations of two lines, determine whether their graphs are parallel or perpendicular.
 Write the equation of a line parallel or perpendicular to a given line.
 Solve a system of linear equations.
Two competing telephone companies offer different payment plans. The two plans charge the same rate per long distance minute, but charge a different monthly flat fee. A consumer wants to determine whether the two plans will ever cost the same amount for a given number of long distance minutes used. The total cost of each payment plan can be represented by a linear function. To solve the problem, we will need to compare the functions. In this section, we will consider methods of comparing functions using graphs.
Graphing Linear Functions
Previously, we saw that that the graph of a linear function is a straight line. We were also able to see the points of the function as well as the initial value from a graph. By graphing two functions, then, we can more easily compare their characteristics. There are three basic methods of graphing linear functions:
 Plot the points and then drawing a line through the points.
 Use the yintercept and slope.
 Use transformations of the identity function \(f(x)=x\).
Graphing a Function by Plotting Points
To find points of a function, we can choose input values, evaluate the function at these input values, and calculate output values. The input values and corresponding output values form coordinate pairs. We then plot the coordinate pairs on a grid. In general, we should evaluate the function at a minimum of two inputs in order to find at least two points on the graph. For example, given the function, \(f(x)=2x\), we might use the input values 1 and 2. Evaluating the function for an input value of 1 yields an output value of 2, which is represented by the point \((1,2)\). Evaluating the function for an input value of 2 yields an output value of 4, which is represented by the point \((2,4)\). Choosing three points is often advisable because if all three points do not fall on the same line, we know we made an error.
HowTO: Given a linear function, graph by plotting points.
 Choose a minimum of two input values.
 Evaluate the function at each input value.
 Use the resulting output values to identify coordinate pairs.
 Plot the coordinate pairs on a grid.
 Draw a line through the points.
Example \(\PageIndex{1}\): Graphing by Plotting Points
Graph \(f(x)=−\frac{2}{3}x+5\) by plotting points.
Solution
Begin by choosing input values. This function includes a fraction with a denominator of 3, so let’s choose multiples of 3 as input values. We will choose 0, 3, and 6.
Evaluate the function at each input value, and use the output value to identify coordinate pairs.
\[\begin{align*} x&=0 & f(0)&=\dfrac{2}{3}(0)+5=5\rightarrow(0,5) \\ x&=3 & f(3)&=\dfrac{2}{3}(3)+5=3\rightarrow(3,3) \\ x&=6 & f(6)&=\dfrac{2}{3}(6)+5=1\rightarrow(6,1) \end{align*}\]
Plot the coordinate pairs and draw a line through the points. Figure \(\PageIndex{1}\) represents the graph of the function \(f(x)=−\frac{2}{3}x+5\).
Figure \(\PageIndex{1}\): The graph of the linear function \(f(x)=−\frac{2}{3}x+5\).
Analysis
The graph of the function is a line as expected for a linear function. In addition, the graph has a downward slant, which indicates a negative slope. This is also expected from the negative constant rate of change in the equation for the function.
Exercise \(\PageIndex{1}\)
Graph \(f(x)=−\frac{3}{4}x+6\) by plotting points.
 Answer

Figure \(\PageIndex{2}\)
Graphing a Function Using yintercept and Slope
Another way to graph linear functions is by using specific characteristics of the function rather than plotting points. The first characteristic is its yintercept, which is the point at which the input value is zero. To find the yintercept, we can set \(x=0\) in the equation.
The other characteristic of the linear function is its slope \(m\), which is a measure of its steepness. Recall that the slope is the rate of change of the function. The slope of a function is equal to the ratio of the change in outputs to the change in inputs. Another way to think about the slope is by dividing the vertical difference, or rise, by the horizontal difference, or run. We encountered both the yintercept and the slope in Linear Functions.
Let’s consider the following function.
\[f(x)=\dfrac{1}{2}x+1\]
The slope is \(\frac{1}{2}\). Because the slope is positive, we know the graph will slant upward from left to right. The yintercept is the point on the graph when \(x=0\). The graph crosses the yaxis at \((0,1)\). Now we know the slope and the yintercept. We can begin graphing by plotting the point \((0,1)\) We know that the slope is rise over run, \(m=\frac{\text{rise}}{\text{run}}\). From our example, we have \(m=\frac{1}{2}\), which means that the rise is 1 and the run is 2. So starting from our yintercept \((0,1)\), we can rise 1 and then run 2, or run 2 and then rise 1. We repeat until we have a few points, and then we draw a line through the points as shown in Figure \(\PageIndex{3}\).
Figure \(\PageIndex{3}\): Graph of \(f(x)\) showing slope and yintercept
Graphical Interpretation of a Linear Function
In the equation \(f(x)=mx+b\)
 \(b\) is the yintercept of the graph and indicates the point \((0,b)\) at which the graph crosses the yaxis.
 \(m\) is the slope of the line and indicates the vertical displacement (rise) and horizontal displacement (run) between each successive pair of points. Recall the formula for the slope:
\[m=\dfrac{\text{change in output (rise)}}{\text{change in input (run)}}=\dfrac{{\Delta}y}{{\Delta}x}=\dfrac{y_2y_1}{x_2x_1}\]
Exercise \(\PageIndex{1}\)
Do all linear functions have yintercepts?
 Answer

Yes. All linear functions cross the yaxis and therefore have yintercepts. (Note: A vertical line parallel to the yaxis does not have a yintercept, but it is not a function.)
HowTO: Given the equation for a linear function, graph the function using the yintercept and slope.
 Evaluate the function at an input value of zero to find the yintercept.
 Identify the slope as the rate of change of the input value.
 Plot the point represented by the yintercept.
 Use \(\frac{\text{rise}}{\text{run}}\) to determine at least two more points on the line.
 Sketch the line that passes through the points.
Example \(\PageIndex{2}\): Graphing by Using the yintercept and Slope
Graph \(f(x)=−\frac{2}{3}x+5\) using the yintercept and slope.
Solution
Evaluate the function at \(x=0\) to find the yintercept. The output value when \(x=0\) is 5, so the graph will cross the yaxis at \((0,5)\).
According to the equation for the function, the slope of the line is \(\frac{2}{3}\). This tells us that for each vertical decrease in the “rise” of –2 units, the “run” increases by 3 units in the horizontal direction. We can now graph the function by first plotting the yintercept on the graph in Figure \(\PageIndex{4}\). From the initial value \((0,5)\) we move down 2 units and to the right 3 units. We can extend the line to the left and right by repeating, and then draw a line through the points.
Figure \(\PageIndex{4}\): Graph of \(f(x)\)
Analysis
The graph slants downward from left to right, which means it has a negative slope as expected.
Exercise \(\PageIndex{2}\)
Find a point on the graph we drew in Example \(\PageIndex{2}\) that has a negative xvalue.
 Answer

Possible answers include \((−3,7)\), \((−6,9)\), or \((−9,11)\).
Graphing a Function Using Transformations
Another option for graphing is to use transformations of the identity function \(f(x)=x\). A function may be transformed by a shift up, down, left, or right. A function may also be transformed using a reflection, stretch, or compression.
Vertical Stretch or Compression
In the equation \(f(x)=mx\), the \(m\) is acting as the vertical stretch or compression of the identity function. When \(m\) is negative, there is also a vertical reflection of the graph. Notice in Figure \(\PageIndex{5}\) that multiplying the equation of \(f(x)=x\) by \(m\) stretches the graph of \(f\) by a factor of \(m\) units if \(m>1\) and compresses the graph of \(f\) by a factor of \(m\) units if \(0<m<1\). This means the larger the absolute value of \(m\), the steeper the slope.
Figure \(\PageIndex{5}\): Vertical stretches and compressions and reflections on the function \(f(x)=x\).
Vertical Shift
In \(f(x)=mx+b\), the \(b\) acts as the vertical shift, moving the graph up and down without affecting the slope of the line. Notice in Figure \(\PageIndex{6}\) that adding a value of \(b\) to the equation of \(f(x)=x\) shifts the graph of \(f\) a total of \(b\) units up if \(b\) is positive and \(b\) units down if \(b\) is negative.
Figure \(\PageIndex{6}\): This graph illustrates vertical shifts of the function \(f(x)=x\).
Using vertical stretches or compressions along with vertical shifts is another way to look at identifying different types of linear functions. Although this may not be the easiest way to graph this type of function, it is still important to practice each method.
Given the equation of a linear function, use transformations to graph the linear function in the form \(f(x)=mx+b\).
 Graph \(f(x)=x\).
 Vertically stretch or compress the graph by a factor \(m\).
 Shift the graph up or down \(b\) units.
Example \(\PageIndex{3}\): Graphing by Using Transformations
Graph \(f(x)=\frac{1}{2}x−3\) using transformations.
Solution
The equation for the function shows that \(m=\frac{1}{2}\) so the identity function is vertically compressed by \(\frac{1}{2}\). The equation for the function also shows that \(b=−3\) so the identity function is vertically shifted down 3 units. First, graph the identity function, and show the vertical compression as in Figure \(\PageIndex{7}\).
Figure \(\PageIndex{7}\): The function, \(y=x\), compressed by a factor of \(\frac{1}{2}\).
Then show the vertical shift as in Figure \(\PageIndex{8}\).
Figure \(\PageIndex{8}\): The function \(y=\frac{1}{2}x\), shifted down 3 units.
Exercise \(\PageIndex{3}\)
Graph \(f(x)=4+2x\), using transformations.
 Answer

Figure \(\PageIndex{9}\)
In Example 2.2.3, could we have sketched the graph by reversing the order of the transformations?
No. The order of the transformations follows the order of operations. When the function is evaluated at a given input, the corresponding output is calculated by following the order of operations. This is why we performed the compression first. For example, following the order: Let the input be 2.
\[\begin{align} f(2)&=\dfrac{1}{2}(2)3 \\ &=13\\ &=2 \end{align}\]
Writing the Equation for a Function from the Graph of a Line
Recall that in Linear Functions, we wrote the equation for a linear function from a graph. Now we can extend what we know about graphing linear functions to analyze graphs a little more closely. Begin by taking a look at Figure \(\PageIndex{10}\). We can see right away that the graph crosses the yaxis at the point \((0, 4)\) so this is the yintercept.
Figure \(\PageIndex{10}\): Graph of a linear function
Then we can calculate the slope by finding the rise and run. We can choose any two points, but let’s look at the point (−2,0). To get from this point to the yintercept, we must move up 4 units (rise) and to the right 2 units (run). So the slope must be
\[m=\dfrac{\text{rise}}{\text{run}}=\dfrac{4}{2}=2\]
Substituting the slope and yintercept into the slopeintercept form of a line gives
\[y=2x+4\]
Given a graph of linear function, find the equation to describe the function.
 Identify the yintercept of an equation.
 Choose two points to determine the slope.
 Substitute the yintercept and slope into the slopeintercept form of a line.
Example \(\PageIndex{4}\): Matching Linear Functions to Their Graphs
Match each equation of the linear functions with one of the lines in Figure \(\PageIndex{11}\).
 \(f(x)=2x+3\)
 \(g(x)=2x−3\)
 \(h(x)=−2x+3\)
 \(j(x)=\frac{1}{2}x+3\)
Figure \(\PageIndex{11}\): Graph of four linear functions
Solution
Analyze the information for each function.
 This function has a slope of 2 and a yintercept of 3. It must pass through the point \((0, 3)\) and slant upward from left to right. We can use two points to find the slope, or we can compare it with the other functions listed. Function \(g\) has the same slope, but a different yintercept. Lines I and III have the same slant because they have the same slope. Line III does not pass through \((0, 3)\) so \(f\) must be represented by line I.
 This function also has a slope of 2, but a yintercept of −3. It must pass through the point \((0,−3)\) and slant upward from left to right. It must be represented by line III.
 This function has a slope of –2 and a yintercept of 3. This is the only function listed with a negative slope, so it must be represented by line IV because it slants downward from left to right.
 This function has a slope of \(\frac{1}{2}\) and a yintercept of 3. It must pass through the point (0, 3) and slant upward from left to right. Lines I and II pass through \((0, 3)\), but the slope of \(j\) is less than the slope of \(f\) so the line for \(j\) must be flatter. This function is represented by Line II.
Now we can relabel the lines as in Figure \(\PageIndex{12}\).
Figure \(\PageIndex{12}\)
Finding the xintercept of a Line
So far, we have been finding the yintercepts of a function: the point at which the graph of the function crosses the yaxis. A function may also have an xintercept, which is the xcoordinate of the point where the graph of the function crosses the xaxis. In other words, it is the input value when the output value is zero.
To find the xintercept, set a function \(f(x)\) equal to zero and solve for the value of \(x\). For example, consider the function shown.
\[f(x)=3x−6\]
Set the function equal to 0 and solve for \(x\).
\[\begin{align} 0&=3x6 \\ 6&=3x \\ 2&=x \\ x&=2 \end{align}\]
The graph of the function crosses the xaxis at the point \((2, 0)\).
Do all linear functions have xintercepts?
No. However, linear functions of the form \(y=c\), where \(c\) is a nonzero real number are the only examples of linear functions with no xintercept. For example, \(y=5\) is a horizontal line 5 units above the xaxis. This function has no xintercepts, as shown in Figure \(\PageIndex{13}\).
Figure \(\PageIndex{13}\): Graph of \(y= 5\).
Note: xintercept
The xintercept of the function is value of \(x\) when \(f(x)=0\). It can be solved by the equation \(0=mx+b\).
Example \(\PageIndex{5}\): Finding an xintercept
Find the xintercept of \(f(x)=\frac{1}{2}−3\).
Solution
Set the function equal to zero to solve for \(x\).
\[\begin{align*} 0&=\dfrac{1}{2}x3 \\ 3&=\dfrac{1}{2}x \\ 6 &= x \\ x&=6 \end{align*}\]
The graph crosses the xaxis at the point \((6, 0)\).
Analysis
A graph of the function is shown in Figure \(\PageIndex{14}\). We can see that the xintercept is \((6, 0)\) as we expected.
Figure \(\PageIndex{14}\): The graph of the linear function \(f(x)=\frac{1}{2}x−3\).
Exercise \(\PageIndex{5}\)
Find the xintercept of \(f(x)=\frac{1}{4}x−4\).
 Answer

\((16, 0)\)
Describing Horizontal and Vertical Lines
There are two special cases of lines on a graph—horizontal and vertical lines. A horizontal line indicates a constant output, or yvalue. In Figure \(\PageIndex{15}\), we see that the output has a value of 2 for every input value. The change in outputs between any two points, therefore, is 0. In the slope formula, the numerator is 0, so the slope is 0. If we use \(m=0\) in the equation \(f(x)=mx+b\), the equation simplifies to \(f(x)=b\). In other words, the value of the function is a constant. This graph represents the function \(f(x)=2\).
Figure \(\PageIndex{15}\): A horizontal line representing the function \(f(x)=2\).
A vertical line indicates a constant input, or xvalue. We can see that the input value for every point on the line is 2, but the output value varies. Because this input value is mapped to more than one output value, a vertical line does not represent a function. Notice that between any two points, the change in the input values is zero. In the slope formula, the denominator will be zero, so the slope of a vertical line is undefined.
Figure \(\PageIndex{16}\)
Notice that a vertical line, such as the one in Figure \(\PageIndex{17}\), has an xintercept, but no yintercept unless it’s the line \(x=0\). This graph represents the line \(x=2\).
Figure \(\PageIndex{17}\): The vertical line, \(x=2\), which does not represent a function.
Definitions: Horizontal and Vertical Lines
Lines can be horizontal or vertical.
 A horizontal line is a line defined by an equation in the form \(f(x)=b\).
 A vertical line is a line defined by an equation in the form \(x=a\).
Example \(\PageIndex{6}\): Writing the Equation of a Horizontal Line
Write the equation of the line graphed in Figure \(\PageIndex{18}\).
Figure \(\PageIndex{18}\): Graph of \(x=7\).
Solution
For any xvalue, the yvalue is −4, so the equation is \(y=−4\).
Example \(\PageIndex{7}\): Writing the Equation of a Vertical Line
Write the equation of the line graphed in Figure \(\PageIndex{19}\).
Figure \(\PageIndex{19}\): Graph of a vertical line
Solution
The constant xvalue is 7, so the equation is \(x=7\).
Determining Whether Lines are Parallel or Perpendicular
The two lines in Figure \(\PageIndex{20}\) are parallel lines: they will never intersect. Notice that they have exactly the same steepness, which means their slopes are identical. The only difference between the two lines is the yintercept. If we shifted one line vertically toward the yintercept of the other, they would become the same line.
Figure \(\PageIndex{20}\): Parallel lines.
We can determine from their equations whether two lines are parallel by comparing their slopes. If the slopes are the same and the yintercepts are different, the lines are parallel. If the slopes are different, the lines are not parallel.
Unlike parallel lines, perpendicular lines do intersect. Their intersection forms a right, or 90degree, angle. The two lines in Figure \(\PageIndex{21}\) are perpendicular.
Figure \(\PageIndex{21}\): Perpendicular lines.
Perpendicular lines do not have the same slope. The slopes of perpendicular lines are different from one another in a specific way. The slope of one line is the negative reciprocal of the slope of the other line. The product of a number and its reciprocal is 1. So, if \(m_1\) and \(m_2\) are negative reciprocals of one another, they can be multiplied together to yield –1.
\[m_1m_2=−1\]
To find the reciprocal of a number, divide 1 by the number. So the reciprocal of 8 is \(\frac{1}{8}\), and the reciprocal of \(\frac{1}{8}\) is 8. To find the negative reciprocal, first find the reciprocal and then change the sign.
As with parallel lines, we can determine whether two lines are perpendicular by comparing their slopes, assuming that the lines are neither horizontal nor perpendicular. The slope of each line below is the negative reciprocal of the other so the lines are perpendicular.
\[\begin{align} f(x)&=\dfrac{1}{4}x+2 &\text{negative reciprocal of $\dfrac{1}{4}$ is 4} \\ f(x)&=4x+3 &\text{negative reciprocal of 4 is $\dfrac{1}{4}$} \end{align}\]
The product of the slopes is –1.
\[−4\Big(\dfrac{1}{4}\Big)=−1\]
Definitions: Parallel and Perpendicular Lines
Two lines are parallel lines if they do not intersect. The slopes of the lines are the same.
\(f(x)=m_1x+b_1\) and \(g(x)=m_2x+b_2\) are parallel if \(m_1 = m_2\).
If and only if \(b_1=b_2\) and \(m_1=m_2\), we say the lines coincide. Coincident lines are the same line.
Two lines are perpendicular lines if they intersect at right angles.
\(f(x)=m_1x+b_1\) and \(g(x)=m_2x+b_2\) are perpendicular if \(m_1m_2=−1\), and so \(m_2=\dfrac{−1}{m_1}\).
Example \(\PageIndex{8}\): Identifying Parallel and Perpendicular Lines
Given the functions below, identify the functions whose graphs are a pair of parallel lines and a pair of perpendicular lines.
\[\begin{align} f(x)&=2x+3 & h(x)&=2x+2 \\ g(x)&=\dfrac{1}{2}x4 & f(x)&=2x6 \end{align}\]
Solution
Parallel lines have the same slope. Because the functions \(f(x)=2x+3\) and \(j(x)=2x−6\) each have a slope of 2, they represent parallel lines. Perpendicular lines have negative reciprocal slopes. Because −2 and \(\frac{1}{2}\) are negative reciprocals, the equations, \(g(x)=\frac{1}{2}x−4\) and \(h(x)=−2x+2\) represent perpendicular lines.
Analysis
A graph of the lines is shown in Figure \(\PageIndex{22}\).
Figure \(\PageIndex{22}\): Graph of \(h(x)\) (blue), \(f(x)\) (orange), \(j(x)\) (green), and \(g(x)\) (red)
The graph shows that the lines \(f(x)=2x+3\) and \(j(x)=2x–6\) are parallel, and the lines \(g(x)=\frac{1}{2}x–4\) and \(h(x)=−2x+2\) are perpendicular.
Writing the Equation of a Line Parallel or Perpendicular to a Given Line
If we know the equation of a line, we can use what we know about slope to write the equation of a line that is either parallel or perpendicular to the given line.
Writing Equations of Parallel Lines
Suppose for example, we are given the following equation.
\[f(x)=3x+1\]
We know that the slope of the line formed by the function is 3. We also know that the yintercept is \((0,1)\). Any other line with a slope of 3 will be parallel to \(f(x)\). So the lines formed by all of the following functions will be parallel to \(f(x)\).
\[\begin{align} g(x)&=3x+6 \\ h(x)&=3x+1\\ p(x)&=3x+\dfrac{2}{3} \end{align}\]
Suppose then we want to write the equation of a line that is parallel to \(f\) and passes through the point \((1, 7)\). We already know that the slope is 3. We just need to determine which value for \(b\) will give the correct line. We can begin with the pointslope form of an equation for a line, and then rewrite it in the slopeintercept form.
\[\begin{align} y−y_1&=m(x−x_1) \\ y−7&=3(x−1) \\ y−7&=3x−3 \\ y&=3x+4 \end{align}\]
So \(g(x)=3x+4\) is parallel to \(f(x)=3x+1\) and passes through the point \((1, 7)\).
Given the equation of a function and a point through which its graph passes, write the equation of a line parallel to the given line that passes through the given point.
 Find the slope of the function.
 Substitute the given values into either the general pointslope equation or the slopeintercept equation for a line.
 Simplify.
Example \(\PageIndex{9}\): Finding a Line Parallel to a Given Line
Find a line parallel to the graph of \(f(x)=3x+6\) that passes through the point \((3, 0)\).
Solution
The slope of the given line is 3. If we choose the slopeintercept form, we can substitute \(m=3\), \(x=3\), and \(f(x)=0\) into the slopeintercept form to find the yintercept.
\[\begin{align} g(x)&=3x+b \\ 0&=3(3)+b \\ b&=9 \end{align}\]
The line parallel to \(f(x)\) that passes through \((3,0)\) is \(g(x)=3x−9\).
Analysis
We can confirm that the two lines are parallel by graphing them. Figure \(\PageIndex{23}\) shows that the two lines will never intersect.
Figure \(\PageIndex{23}\): Graph of two functions where the blue line is \(y=3x+6\), and the orange line is \(y=3x9\).
Writing Equations of Perpendicular Lines
We can use a very similar process to write the equation for a line perpendicular to a given line. Instead of using the same slope, however, we use the negative reciprocal of the given slope. Suppose we are given the following function:
\[f(x)=2x+4\]
The slope of the line is 2, and its negative reciprocal is \(−\frac{1}{2}\). Any function with a slope of \(−\frac{1}{2}\) will be perpendicular to \(f(x)\). So the lines formed by all of the following functions will be perpendicular to \(f(x)\).
\[\begin{align} g(x)&=\dfrac{1}{2}x+4 \\ h(x)&=\dfrac{1}{2}x+2 \\ p(x)&=\dfrac{1}{2}x\dfrac{1}{2} \end{align}\]
As before, we can narrow down our choices for a particular perpendicular line if we know that it passes through a given point. Suppose then we want to write the equation of a line that is perpendicular to \(f(x)\) and passes through the point \((4, 0)\). We already know that the slope is \(−\frac{1}{2}\). Now we can use the point to find the yintercept by substituting the given values into the slopeintercept form of a line and solving for \(b\).
\[\begin{align} g(x)&=mx+b \\ 0&=\dfrac{1}{2}(4)+b \\ 0 & = 2+b\\ 2&=b \\ b&=2 \end{align}\]
The equation for the function with a slope of \(−\frac{1}{2}\) and a yintercept of 2 is
\[g(x)=−\dfrac{1}{2}x+2\]
So \(g(x)=−\frac{1}{2}x+2\) is perpendicular to \(f(x)=2x+4\) and passes through the point \((4, 0)\). Be aware that perpendicular lines may not look obviously perpendicular on a graphing calculator unless we use the square zoom feature.
A horizontal line has a slope of zero and a vertical line has an undefined slope. These two lines are perpendicular, but the product of their slopes is not –1. Doesn’t this fact contradict the definition of perpendicular lines?
No. For two perpendicular linear functions, the product of their slopes is –1. However, a vertical line is not a function so the definition is not contradicted.
Given the equation of a function and a point through which its graph passes, write the equation of a line perpendicular to the given line.
 Find the slope of the function.
 Determine the negative reciprocal of the slope.
 Substitute the new slope and the values for \(x\) and \(y\) from the coordinate pair provided into \(g(x)=mx+b\).
 Solve for \(b\).
 Write the equation for the line.
Example \(\PageIndex{10}\): Finding the Equation of a Perpendicular Line
Find the equation of a line perpendicular to \(f(x)=3x+3\) that passes through the point \((3, 0)\).
Solution
The original line has slope \(m=3\), so the slope of the perpendicular line will be its negative reciprocal, or \(−\frac{1}{3}\). Using this slope and the given point, we can find the equation for the line.
\[\begin{align} g(x)&= \; –\dfrac{1}{3}x+b \\ 0&= \; –\dfrac{1}{3}(3)+b \\ 1&=b \\ b&=1 \end{align}\]
The line perpendicular to \(f(x)\) that passes through \((3, 0)\) is \(g(x)=−\frac{1}{3}x+1\).
Analysis
A graph of the two lines is shown in Figure \(\PageIndex{24}\) below.
Figure \(\PageIndex{24}\): Graph of two functions where the blue line is \(g(x)= \frac{1}{3}x+1\), and the orange line is \(f(x)=3x+6\).
Exercise \(\PageIndex{5}\)
Given the function \(h(x)=2x−4\), write an equation for the line passing through \((0,0)\) that is
 parallel to \(h(x)\)
 perpendicular to \(h(x)\)
 Answer

\(f(x)=2x\) \(g(x)=−\frac{1}{2}x\)
Given two points on a line and a third point, write the equation of the perpendicular line that passes through the point.
 Determine the slope of the line passing through the points.
 Find the negative reciprocal of the slope.
 Use the slopeintercept form or pointslope form to write the equation by substituting the known values.
 Simplify.
Example \(\PageIndex{11}\): Finding the Equation of a Line Perpendicular to a Given Line Passing through a Point
A line passes through the points \((−2, 6)\) and \((4,5)\). Find the equation of a perpendicular line that passes through the point \((4,5)\).
From the two points of the given line, we can calculate the slope of that line.
\[\begin{align} m_1&=\dfrac{56}{4−(−2)} \\ &=\dfrac{1}{6} \\ &=−\dfrac{1}{6} \end{align}\]
Find the negative reciprocal of the slope.
\[\begin{align} m_2&=\dfrac{1}{\dfrac{1}{6}} \\ &=−1\Big(−\dfrac{6}{1}\Big) \\ & =6 \end{align}\]
We can then solve for the yintercept of the line passing through the point \((4,5)\).
\[\begin{align} g(x)&=6x+b \\ 5&=6(4)+b \\ 5&=24+b \\ −19&=b \\ b&=−19 \end{align}\]
The equation for the line that is perpendicular to the line passing through the two given points and also passes through point \((4,5)\) is
\[y=6x−19\]
Exercise \(\PageIndex{1}\)
A line passes through the points, \((−2,−15)\) and \((2,−3)\). Find the equation of a perpendicular line that passes through the point, \((6,4)\).
 Answer

\(y= \; –\dfrac{1}{3}x+6\)
Solving a System of Linear Equations Using a Graph
A system of linear equations includes two or more linear equations. The graphs of two lines will intersect at a single point if they are not parallel. Two parallel lines can also intersect if they are coincident, which means they are the same line and they intersect at every point. For two lines that are not parallel, the single point of intersection will satisfy both equations and therefore represent the solution to the system.
To find this point when the equations are given as functions, we can solve for an input value so that \(f(x)=g(x)\). In other words, we can set the formulas for the lines equal to one another, and solve for the input that satisfies the equation.
Example \(\PageIndex{12}\): Finding a Point of Intersection Algebraically
Find the point of intersection of the lines \(h(t)=3t−4\) and \(j(t)=5−t\).
Solution
Set \(h(t)=j(t)\).
\[\begin{align} 3t4&=5t \\ 4t&=9 \\ t&=\dfrac{9}{4} \end{align}\]
This tells us the lines intersect when the input is \(\frac{9}{4}\).
We can then find the output value of the intersection point by evaluating either function at this input.
\[\begin{align} j\Big( \dfrac{9}{4} \Big)&=5\dfrac{9}{4} \\ &= \dfrac{11}{4}\end{align}\]
These lines intersect at the point \(\Big(\frac{9}{4},\frac{11}{4}\Big)\).
Analysis
Looking at Figure \(\PageIndex{25}\), this result seems reasonable.
Figure \(\PageIndex{25}\): Graph of two functions \(h(t) = 3t  4\) and \(j(t)=t +5\) and their intersection at \((\frac{9}{4},\frac{11}{4})\).
If we were asked to find the point of intersection of two distinct parallel lines, should something in the solution process alert us to the fact that there are no solutions?
Yes. After setting the two equations equal to one another, the result would be the contradiction “\(0 = \text{nonzero real number}\)”.
\(\PageIndex{7}\): Look at the graph in Figure \(\PageIndex{23}\) and identify the following for the function \(j(t):\)
 yintercept
 xintercept(s)
 slope
 Is \(j(t)\) parallel or perpendicular to \(h(t)\) (or neither)?
 Is \(j(t)\) an increasing or decreasing function (or neither)?
 Write a transformation description for \(j(t)\) from the identity toolkit function \(f(x)=x\).
Solution
 \((0,5)\)
 (5, 0)
 Slope 1
 Neither parallel nor perpendicular
 Decreasing function

Given the identity function, perform a vertical flip (over the taxis) and shift up 5 units.
Example \(\PageIndex{13}\): Finding a BreakEven Point
A company sells sports helmets. The company incurs a onetime fixed cost for $250,000. Each helmet costs $120 to produce, and sells for $140.
 Find the cost function, \(C\), to produce \(x\) helmets, in dollars.
 Find the revenue function, \(R\), from the sales of \(x\) helmets, in dollars.
 Find the breakeven point, the point of intersection of the two graphs \(C\) and \(R\).
Solution
a. The cost function in the sum of the fixed cost, $125,000, and the variable cost, $120 per helmet.
\(C(x)=120x+250,000\)
b. The revenue function is the total revenue from the sale of \(x\) helmets, \(R(x)=140x\).
c. The breakeven point is the point of intersection of the graph of the cost and revenue functions. To find the xcoordinate of the coordinate pair of the point of intersection, set the two equations equal, and solve for \(x\).
\[\begin{align} C(x)&=R(x) \\ 250,000+120x&=140x \\ 250,000&=20x \\ x&=12,500 \end{align}\]
To find \(y\), evaluate either the revenue or the cost function at 12,500.
\[\begin{align} R(20)&=140(12,500) \\ &=$1,750,000 \end{align}\]
The breakeven point is \((12,500,1,750,000)\).
Analysis
This means if the company sells 12,500 helmets, they break even; both the sales and cost incurred equaled 1.75 million dollars. See Figure \(\PageIndex{26}\).
Figure \(\PageIndex{26}\): Graph of the two functions, \(C(x)\) and \(R(x)\) where it shows that below \((12500, 1750000)\) the company loses money and above that point the company makes a profit.
Key Concepts
 Linear functions may be graphed by plotting points or by using the yintercept and slope.
 Graphs of linear functions may be transformed by using shifts up, down, left, or right, as well as through stretches, compressions, and reflections.
 The yintercept and slope of a line may be used to write the equation of a line.
 The xintercept is the point at which the graph of a linear function crosses the xaxis.
 Horizontal lines are written in the form, \(f(x)=b\).
 Vertical lines are written in the form, \(x=b\).
 Parallel lines have the same slope.
 Perpendicular lines have negative reciprocal slopes, assuming neither is vertical.
 A line parallel to another line, passing through a given point, may be found by substituting the slope value of the line and the x and yvalues of the given point into the equation, \(f(x)=mx+b\), and using the \(b\) that results. Similarly, the pointslope form of an equation can also be used.
 A line perpendicular to another line, passing through a given point, may be found in the same manner, with the exception of using the negative reciprocal slope.
 A system of linear equations may be solved setting the two equations equal to one another and solving for \(x\). The yvalue may be found by evaluating either one of the original equations using this xvalue.
 A system of linear equations may also be solved by finding the point of intersection on a graph.
Glossary
horizontal line
a line defined by \(f(x)=b\), where \(b\) is a real number. The slope of a horizontal line is 0.
parallel lines
two or more lines with the same slope
perpendicular lines
two lines that intersect at right angles and have slopes that are negative reciprocals of each other
vertical line
a line defined by \(x=a\), where a is a real number. The slope of a vertical line is undefined.
xintercept
the point on the graph of a linear function when the output value is 0; the point at which the graph crosses the horizontal axis
Contributors
Jay Abramson (Arizona State University) with contributing authors. Textbook content produced by OpenStax College is licensed under a Creative Commons Attribution License 4.0 license. Download for free at https://openstax.org/details/books/precalculus.