Processing math: 97%
Skip to main content
Library homepage
 

Text Color

Text Size

 

Margin Size

 

Font Type

Enable Dyslexic Font
Mathematics LibreTexts

1.1: Real Numbers - Algebra Essentials

( \newcommand{\kernel}{\mathrm{null}\,}\)

Learning Objectives
  • Classify a real number as a natural, whole, integer, rational, or irrational number.
  • Perform calculations using order of operations.
  • Use the following properties of real numbers: commutative, associative, distributive, inverse, and identity.
  • Evaluate algebraic expressions.
  • Simplify algebraic expressions.

It is often said that mathematics is the language of science. If this is true, then the language of mathematics is numbers. The earliest use of numbers occurred 100 centuries ago in the Middle East to count, or enumerate items. Farmers, cattlemen, and tradesmen used tokens, stones, or markers to signify a single quantity—a sheaf of grain, a head of livestock, or a fixed length of cloth, for example. Doing so made commerce possible, leading to improved communications and the spread of civilization.

Three to four thousand years ago, Egyptians introduced fractions. They first used them to show reciprocals. Later, they used them to represent the amount when a quantity was divided into equal parts.

But what if there were no cattle to trade or an entire crop of grain was lost in a flood? How could someone indicate the existence of nothing? From earliest times, people had thought of a “base state” while counting and used various symbols to represent this null condition. However, it was not until about the fifth century A.D. in India that zero was added to the number system and used as a numeral in calculations.

Clearly, there was also a need for numbers to represent loss or debt. In India, in the seventh century A.D., negative numbers were used as solutions to mathematical equations and commercial debts. The opposites of the counting numbers expanded the number system even further.

Because of the evolution of the number system, we can now perform complex calculations using these and other categories of real numbers. In this section, we will explore sets of numbers, calculations with different kinds of numbers, and the use of numbers in expressions.

Classifying a Real Number

The numbers we use for counting, or enumerating items, are the natural numbers: 1,2,3,4,5 and so on. We describe them in set notation as {1,2,3,...} where the ellipsis () indicates that the numbers continue to infinity. The natural numbers are, of course, also called the counting numbers. Any time we enumerate the members of a team, count the coins in a collection, or tally the trees in a grove, we are using the set of natural numbers. The set of whole numbers is the set of natural numbers plus zero: {0,1,2,3,...}.

The set of integers adds the opposites of the natural numbers to the set of whole numbers: {,3,2,1,0,1,2,3,}. It is useful to note that the set of integers is made up of three distinct subsets: negative integers, zero, and positive integers. In this sense, the positive integers are just the natural numbers. Another way to think about it is that the natural numbers are a subset of the integers.

negative integers,3,2,1,0zero,positive integers1,2,3,

The set of rational numbers is written as {mn|m and n are integers and n0}.Notice from the definition that rational numbers are fractions (or quotients) containing integers in both the numerator and the denominator, and the denominator is never 0. We can also see that every natural number, whole number, and integer is a rational number with a denominator of 1.

Because they are fractions, any rational number can also be expressed in decimal form. Any rational number can be represented as either:

  1. a terminating decimal: 158=1.875, or
  2. a repeating decimal: 411=0.36363636=0.¯36

We use a line drawn over the repeating block of numbers instead of writing the group multiple times.

Example 1.1.1: Writing Integers as Rational Numbers

Write each of the following as a rational number. Write a fraction with the integer in the numerator and 1 in the denominator.

  1. 7
  2. 0
  3. 8
Solution

a. 7=71

b. 0=01

c. 8=81

Exercise 1.1.1

Write each of the following as a rational number.

  1. 11
  2. 3
  3. 4
Answer
  1. 111
  2. 31
  3. 41
Example 1.1.2: Identifying Rational Numbers

Write each of the following rational numbers as either a terminating or repeating decimal.

  1. 57
  2. 155
  3. 1325
Solution

a. a repeating decimal

b. 155=3(or 3.0), a terminating decimal

c. 1325=0.52, a terminating decimal

Exercise 1.1.2

Write each of the following rational numbers as either a terminating or repeating decimal.

  1. 6817
  2. 813
  3. 1325
Answer
  1. 4 (or 4.0), terminating
  2. 0.¯615384, repeating
  3. 0.85, terminating

Irrational Numbers

At some point in the ancient past, someone discovered that not all numbers are rational numbers. A builder, for instance, may have found that the diagonal of a square with unit sides was not 2 or even 32, but was something else. Or a garment maker might have observed that the ratio of the circumference to the diameter of a roll of cloth was a little bit more than 3, but still not a rational number. Such numbers are said to be irrational because they cannot be written as fractions. These numbers make up the set of irrational numbers. Irrational numbers cannot be expressed as a fraction of two integers. It is impossible to describe this set of numbers by a single rule except to say that a number is irrational if it is not rational. So we write this as shown.

{hh is not a rational number}

Example 1.1.3: Differentiating Rational and Irrational Numbers

Determine whether each of the following numbers is rational or irrational. If it is rational, determine whether it is a terminating or repeating decimal.

  1. 25
  2. 339
  3. 11
  4. 1734
  5. 0.3033033303333
Solution
  1. 25: This can be simplified as 25=5. Therefore,25is rational.
  2. 339: Because it is a fraction,339 is a rational number. Next, simplify and divide. 339=339 So, 339 is rational and a repeating decimal.
  3. 11: This cannot be simplified any further. Therefore, 11 is an irrational number.
  4. 1734: Because it is a fraction, 1734 is a rational number. Simplify and divide. 1734=0.5 So, 1734 is rational and a terminating decimal.
  5. 0.3033033303333 is not a terminating decimal. Also note that there is no repeating pattern because the group of 3s increases each time. Therefore it is neither a terminating nor a repeating decimal and, hence, not a rational number. It is an irrational number.
Exercise 1.1.3

Determine whether each of the following numbers is rational or irrational. If it is rational, determine whether it is a terminating or repeating decimal.

  1. 777
  2. 81
  3. 4.27027002700027
  4. 9113
  5. 39
Answer
  1. rational and repeating;
  2. rational and terminating;
  3. irrational;
  4. rational and terminating;
  5. irrational

Real Numbers

Given any number n, we know that n is either rational or irrational. It cannot be both. The sets of rational and irrational numbers together make up the set of real numbers. As we saw with integers, the real numbers can be divided into three subsets: negative real numbers, zero, and positive real numbers. Each subset includes fractions, decimals, and irrational numbers according to their algebraic sign (+ or –). Zero is considered neither positive nor negative.

The real numbers can be visualized on a horizontal number line with an arbitrary point chosen as 0, with negative numbers to the left of 0 and positive numbers to the right of 0. A fixed unit distance is then used to mark off each integer (or other basic value) on either side of 0. Any real number corresponds to a unique position on the number line.The converse is also true: Each location on the number line corresponds to exactly one real number. This is known as a one-to-one correspondence. We refer to this as the real number line as shown in Figure (1.1.1.

A number line that is marked from negative five to five
Figure 1.1.1: The real number line.
Example 1.1.4: Classifying Real Numbers

Classify each number as either positive or negative and as either rational or irrational. Does the number lie to the left or the right of 0 on the number line?

  1. 103
  2. 5
  3. 289
  4. 6π
  5. 0.615384615384
Solution
  1. 103 is negative and rational. It lies to the left of 0 on the number line.
  2. 5 is positive and irrational. It lies to the right of 0.
  3. 289=172=17 is negative and rational. It lies to the left of 0.
  4. 6π is negative and irrational. It lies to the left of 0.
  5. 0.615384615384 is a repeating decimal so it is rational and positive. It lies to the right of 0.
Exercise 1.1.4

Classify each number as either positive or negative and as either rational or irrational. Does the number lie to the left or the right of 0 on the number line?

  1. 73
  2. 11.411411411
  3. 4719
  4. 52
  5. 6.210735
Answer
  1. positive, irrational; right
  2. negative, rational; left
  3. positive, rational; right
  4. negative, irrational; left
  5. positive, rational; right

Sets of Numbers as Subsets

Beginning with the natural numbers, we have expanded each set to form a larger set, meaning that there is a subset relationship between the sets of numbers we have encountered so far. These relationships become more obvious when seen as a diagram, such as Figure(1.1.2).

A large box labeled: Real Numbers encloses five circles. Four of these circles enclose each other and the other is separate from the rest. The innermost circle contains: 1, 2, 3… N. The circle enclosing that circle contains: 0 W. The circle enclosing that circle contains: …, -3, -2, -1 I. The outermost circle contains: m/n, n not equal to zero Q. The separate circle contains: pi, square root of two, etc Q´.
Figure 1.1.2: Sets of numbers. N: the set of natural numbers. W: the set of whole numbers. I: the set of integers. Q: the set of rational numbers. : the set of irrational numbers
SETS OF NUMBERS

The set of natural numbers includes the numbers used for counting: {1,2,3,...}.

The set of whole numbers is the set of natural numbers plus zero: {0,1,2,3,...}.

The set of integers adds the negative natural numbers to the set of whole numbers: {...,3,2,1,0,1,2,3,...}.

The set of rational numbers includes fractions written as {mn|m and n are integers and n0}.

The set of irrational numbers is the set of numbers that are not rational, are nonrepeating, and are nonterminating: {hh is not a rational number}.

Example 1.1.5: Differentiating the Sets of Numbers

Classify each number as being a natural number (N), whole number (W), integer (I), rational number (Q), and/or irrational number (Q′).

  1. 36
  2. 83
  3. 73
  4. 6
  5. 3.2121121112
Solution
  N W I Q Q'
a. 36=6 X X X X  
b. 83=2.¯6       X  
c. 73         X
d. 6     X X  
e. 3.2121121112...         X
Exercise 1.1.5

Classify each number as being a natural number (N), whole number (W), integer (I), rational number (Q), and/or irrational number (Q′).

  1. 357
  2. 0
  3. 169
  4. 24
  5. 4.763763763...
Answer
  N W I Q Q'
a. 357     X X  
b. 0   X X X  
c. 169 X X X X  
d. 24         X
e. 4.763763763...       X  

Performing Calculations Using the Order of Operations

When we multiply a number by itself, we square it or raise it to a power of 2. For example, 42=4×4=16. We can raise any number to any power. In general, the exponential notation an means that the number or variable a is used as a factor n times.

an=aaaa n factors

In this notation, an is read as the nth power of a, where a is called the base and n is called the exponent. A term in exponential notation may be part of a mathematical expression, which is a combination of numbers and operations. For example, 24+6×2342 is a mathematical expression.

To evaluate a mathematical expression, we perform the various operations. However, we do not perform them in any random order. We use the order of operations. This is a sequence of rules for evaluating such expressions.

Recall that in mathematics we use parentheses ( ), brackets [ ], and braces { } to group numbers and expressions so that anything appearing within the symbols is treated as a unit. Additionally, fraction bars, radicals, and absolute value bars are treated as grouping symbols. When evaluating a mathematical expression, begin by simplifying expressions within grouping symbols.

The next step is to address any exponents or radicals. Afterward, perform multiplication and division from left to right and finally addition and subtraction from left to right.

Let’s take a look at the expression provided.

24+6×2342

There are no grouping symbols, so we move on to exponents or radicals. The number 4 is raised to a power of 2, so simplify 42 as 16.

24+6×2342

24+6×2316

Next, perform multiplication or division, left to right.

24+6×2316

24+416

Lastly, perform addition or subtraction, left to right.

24+416

2816

12

Therefore,

24+6×2342=12

For some complicated expressions, several passes through the order of operations will be needed. For instance, there may be a radical expression inside parentheses that must be simplified before the parentheses are evaluated. Following the order of operations ensures that anyone simplifying the same mathematical expression will get the same result.

ORDER OF OPERATIONS

Operations in mathematical expressions must be evaluated in a systematic order, which can be simplified using the acronym PEMDAS:

  • P(arentheses)
  • E(xponents)
  • M(ultiplication) and D(ivision)
  • A(ddition) and S(ubtraction)
HOW TO: Given a mathematical expression, simplify it using the order of operations.
  1. Simplify any expressions within grouping symbols.
  2. Simplify any expressions containing exponents or radicals.
  3. Perform any multiplication and division in order, from left to right.
  4. Perform any addition and subtraction in order, from left to right.
Example 1.1.6: Using the Order of Operations

Use the order of operations to evaluate each of the following expressions.

  1. (3×2)24×(6+2)
  2. 5247112
  3. 658+3×(41)
  4. 143×22×532
  5. 7×(5×3)2×[(63)42]+1

Solution


  1. (3×2)24×(6+2)=(6)24×(8)Simplify parentheses=364×8Simplify exponent=3632Simplify multiplication=4Simplify subtraction

  2. 5247112=52479Simplify grouping symbols (radical)=52473Simplify radical=25473Simplify exponent=2173Simplify subtraction in numerator=33Simplify division=0Simplify subtraction

Note that in the first step, the radical is treated as a grouping symbol, like parentheses. Also, in the third step, the fraction bar is considered a grouping symbol so the numerator is considered to be grouped.


  1. 658+3×(41)=6|3|+3×3Simplify inside grouping symbols=63+3×3Simplify absolute value=63+9Simplify multiplication=3+9Simplify subtraction=12Simplify addition

  2. 143×22×532=143×22×59Simplify exponent=146109Simplify products=81Simplify differences=8Simplify quotient

In this example, the fraction bar separates the numerator and denominator, which we simplify separately until the last step.


  1. 7×(5×3)2×[(63)42]+1=7×(15)2×[(3)42]+1Simplify inside parentheses=7×(15)2×(316)+1Simplify exponent=7×(15)2×(13)+1Subtract=105+26+1Multiply=132Add
Exercise 1.1.6

Use the order of operations to evaluate each of the following expressions.

  1. 5242+7×(54)2
  2. 1+7×58×496
  3. |1.84.3|+0.4×15+10
  4. 12×[5×3272]+13×92
  5. [(382)4](38)
Answer
  1. 10
  2. 2
  3. 4.5
  4. 25
  5. 60

Using Properties of Real Numbers

For some activities we perform, the order of certain operations does not matter, but the order of other operations does. For example, it does not make a difference if we put on the right shoe before the left or vice-versa. However, it does matter whether we put on shoes or socks first. The same thing is true for operations in mathematics.

Commutative Properties

The commutative property of addition states that numbers may be added in any order without affecting the sum.

a+b=b+a

We can better see this relationship when using real numbers.

(2)+7=5 and 7+(2)=5

Similarly, the commutative property of multiplication states that numbers may be multiplied in any order without affecting the product.

a×b=b×a

Again, consider an example with real numbers.

(11)×(4)=44 and (4)×(11)=44

It is important to note that neither subtraction nor division is commutative. For example, 175 is not the same as 517. Similarly, 20÷55÷20.

Associative Properties

The associative property of multiplication tells us that it does not matter how we group numbers when multiplying. We can move the grouping symbols to make the calculation easier, and the product remains the same.

a(bc)=(ab)c

Consider this example.

(3×4)×5=60 and 3×(4×5)=60

The associative property of addition tells us that numbers may be grouped differently without affecting the sum.

a+(b+c)=(a+b)+c

This property can be especially helpful when dealing with negative integers. Consider this example.

[15+(9)]+23=29 and 15+[(9)+23]=29

Are subtraction and division associative? Review these examples.

8(315)?=(83)158(12)?=515201064÷(8÷4)?=(64÷8)÷464÷2?=8÷4322

As we can see, neither subtraction nor division is associative.

Distributive Property

The distributive property states that the product of a factor times a sum is the sum of the factor times each term in the sum.

a×(b+c)=a×b+a×c

This property combines both addition and multiplication (and is the only property to do so). Let us consider an example.

The number four is separated by a multiplication symbol from a bracketed expression reading: twelve plus negative seven. Arrows extend from the four pointing to the twelve and negative seven separately. This expression equals four times twelve plus four times negative seven. Under this line the expression reads forty eight plus negative twenty eight. Under this line the expression reads twenty as the answer.

Note that 4 is outside the grouping symbols, so we distribute the 4 by multiplying it by 12, multiplying it by 7, and adding the products.

Example 1.1.7

To be more precise when describing this property, we say that multiplication distributes over addition. The reverse is not true, as we can see in this example.

6+(3×5)?=(6+3)×(6×5)6+(15)?=(9)×(11)2199

Multiplication does not distribute over subtraction, and division distributes over neither addition nor subtraction.

A special case of the distributive property occurs when a sum of terms is subtracted.

ab=a+(b)

For example, consider the difference 12(5+3). We can rewrite the difference of the two terms 12 and (5+3) by turning the subtraction expression into addition of the opposite. So instead of subtracting (5+3), we add the opposite.

12+(1)×(5+3)

Now, distribute 1 and simplify the result.

12(5+3)=12+(1)×(5+3)=12+[(1)×5+(1)×3]=12+(8)=4

This seems like a lot of trouble for a simple sum, but it illustrates a powerful result that will be useful once we introduce algebraic terms. To subtract a sum of terms, change the sign of each term and add the results. With this in mind, we can rewrite the last example.

12(5+3)=12+(53)=128=4

Identity Properties

The identity property of addition states that there is a unique number, called the additive identity (0) that, when added to a number, results in the original number.

a+0=a

The identity property of multiplication states that there is a unique number, called the multiplicative identity (1) that, when multiplied by a number, results in the original number.

a×1=a

For example, we have (6)+0=6 and 23×1=23. There are no exceptions for these properties; they work for every real number, including 0 and 1.

Inverse Properties

The inverse property of addition states that, for every real number a, there is a unique number, called the additive inverse (or opposite), denoted a, that, when added to the original number, results in the additive identity, 0.

a+(a)=0

For example, if a=8, the additive inverse is 8, since (8)+8=0.

The inverse property of multiplication holds for all real numbers except 0 because the reciprocal of 0 is not defined. The property states that, for every real number a, there is a unique number, called the multiplicative inverse (or reciprocal), denoted 1a, that, when multiplied by the original number, results in the multiplicative identity, 1.

a×1a=1

For example, if a=23, the reciprocal, denoted 1a, is 32 because

a1a=(23)×(32)=1

PROPERTIES OF REAL NUMBERS

The following properties hold for real numbers a, b, and c.

Table 1.1.1
  Addition Multiplication
Commutative Property a+b=b+a a×b=b×a
Associative Property a+(b+c)=(a+b)+c a(bc)=(ab)c
Distributive Property a×(b+c)=a×b+a×c
Identity Property

There exists a unique real number called the additive identity, 0, such that, for any real number a

a+0=a

There exists a unique real number called the multiplicative identity, 1, such that, for any real number a

a×1=a
Inverse Property

Every real number a has an additive inverse, or opposite, denoted –a, such that

a+(a)=0

Every nonzero real number a has a multiplicative inverse, or reciprocal, denoted 1a , such that

a×(1a)=1
Example 1.1.8: Using Properties of Real Numbers

Use the properties of real numbers to rewrite and simplify each expression. State which properties apply.

  1. 3×6+3×4
  2. (5+8)+(8)
  3. 6(15+9)
  4. 47×(23×74)
  5. 100×[0.75+(2.38)]
Solution

  1. 3×6+3×4=3×(6+4)Distributive property=3×10Simplify=30Simplify

  2. (5+8)+(8)=5+[8+(8)]Associative property of addition=5+0Inverse property of addition=5Identity property of addition

  3. 6(15+9)=6+[(15)+(9)]Distributive property=6+(24)Simplify=18Simplify

  4. 47×(23×74)=47×(74×23)Commutative property of multiplication=(47×74)×23Associative property of multiplication=1×23Inverse property of multiplication=23Identity property of multiplication

  5. 100×[0.75+(2.38)]=100×0.75+100×(2.38)Distributive property=75+(238)Simplify=163Simplify
Exercise 1.1.7

Use the properties of real numbers to rewrite and simplify each expression. State which properties apply.

  1. (235)×[11×(523)]
  2. 5×(6.2+0.4)
  3. 18(715)
  4. 1718+[49+(1718)]
  5. 6×(3)+6×3
Answer
  1. 11, commutative property of multiplication
  2. 33, distributive property
  3. 26, distributive property
  4. 49,  commutative property of addition, associative property of addition, inverse property of addition, identity property of addition
  5. 0,  distributive property, inverse property of addition, identity property of addition

Evaluating Algebraic Expressions

So far, the mathematical expressions we have seen have involved real numbers only. In mathematics, we may see expressions such as x+5, 43πr3, or 2m3n2. In the expression x+5, 5 is called a constant because it does not vary and x is called a variable because it does. (In naming the variable, ignore any exponents or radicals containing the variable.) An algebraic expression is a collection of constants and variables joined together by the algebraic operations of addition, subtraction, multiplication, and division.

We have already seen some real number examples of exponential notation, a shorthand method of writing products of the same factor. When variables are used, the constants and variables are treated the same way.

(3)5=(3)×(3)×(3)×(3)×(3)x5=x×x×x×x×x(2×7)3=(2×7)×(2×7)×(2×7)(yz)3=(yz)×(yz)×(yz)

In each case, the exponent tells us how many factors of the base to use, whether the base consists of constants or variables.

Any variable in an algebraic expression may take on or be assigned different values. When that happens, the value of the algebraic expression changes. To evaluate an algebraic expression means to determine the value of the expression for a given value of each variable in the expression. Replace each variable in the expression with the given value, then simplify the resulting expression using the order of operations. If the algebraic expression contains more than one variable, replace each variable with its assigned value and simplify the expression as before.

Example 1.1.9: Describing Algebraic Expressions

List the constants and variables for each algebraic expression.

  1. x+5
  2. 43πr3
  3. 2m3n2
Solution
  Constants Variables
a. x+5 5 x
b. 43πr3 43, π r
c. 2m3n2 2 m,n
Exercise 1.1.8

List the constants and variables for each algebraic expression.

  1. 2(L+W)
  2. 4y3+y
Answer
  Constants Variables
a. 2πr(r+h) 2,π r,h
b. 2(L+W) 2 L, W
c. 4y3+y 4 y
Example 1.1.10: Evaluating an Algebraic Expression at Different Values

Evaluate the expression 2x7 for each value for x.

  1. x=0
  2. x=1
  3. x=12
  4. x=4
Solution
  1. Substitute 0 for x. 2x7=2(0)7=07=7
  2. Substitute 1 for x. 2x7=2(1)7=27=5
  3. Substitute 12 for x. 2x7=2(12)7=17=6
  4. Substitute 4 for x. 2x7=2(4)7=87=15
Exercise 1.1.9

Evaluate the expression 113y for each value for y.

  1. y=2
  2. y=0
  3. y=23
  4. y=5
Answer
  1. 11
  2. 26
Example 1.1.11: Evaluating Algebraic Expressions

Evaluate each expression for the given values.

  1. x+5 for x=5
  2. t2t1 for t=10
  3. 43πr3 for r=5
  4. a+ab+b for a=11, b=8
  5. 2m3n2 for m=2, n=3
Solution
  1. Substitute 5 for x. x+5=(5)+5=0
  2. Substitute 10 for t. t2t1=(10)2(10)1=10201=1019
  3. Substitute 5 for r. 43πr3=43π(5)3=43π(125)=5003π
  4. Substitute 11 for a and 8 for b. a+ab+b=(11)+(11)(8)+(8)=11888=85
  5. Substitute 2 for m and 3 for n. 2m3n2=2(2)3(3)2=2(8)(9)=144=12
Exercise 1.1.10

Evaluate each expression for the given values.

  1. y+3y3 for y=5
  2. 72t for t=2
  3. 13πr2 for r=11
  4. (p2q)3 for p=2, q=3
  5. 4(mn)5(nm) for m=23 n=13
Answer
  1. 4
  2. 11
  3. 1213π
  4. 1728
  5. 3

Formulas

An equation is a mathematical statement indicating that two expressions are equal. The expressions can be numerical or algebraic. The equation is not inherently true or false, but only a proposition. The values that make the equation true, the solutions, are found using the properties of real numbers and other results. For example, the equation 2x+1=7 has the unique solution of 3 because when we substitute 3 for x in the equation, we obtain the true statement 2(3)+1=7.

A formula is an equation expressing a relationship between constant and variable quantities. Very often, the equation is a means of finding the value of one quantity (often a single variable) in terms of another or other quantities. One of the most common examples is the formula for finding the area A of a circle in terms of the radius r of the circle: A=πr2. For any value of r, the area A can be found by evaluating the expression πr2.

Example 1.1.12: Using a Formula

A right circular cylinder with radius r and height h has the surface area S (in square units) given by the formula S=2πr(r+h). See Figure 1.1.3. Find the surface area of a cylinder with radius 6 in. and height 9 in. Leave the answer in terms of π.

Fig 1.2.3.png
Figure 1.1.3

Evaluate the expression 2πr(r+h) for r=6 and h=9.

Solution

S=2πr(r+h)=2π(6)[(6)+(9)]=2π(6)(15)=180π

The surface area is 180π square inches.

Exercise 1.1.11

A photograph with length L and width W is placed in a matte of width 8 centimeters (cm). The area of the matte (in square centimeters, or cm2 is found to be A=(L+16)(W+16)L⋅W.See Figure 1.1.4. Find the area of a matte for a photograph with length 32cm and width 24cm.

fig 1.2.4.png
Figure 1.1.4
Answer

1152cm2

Simplifying Algebraic Expressions

Sometimes we can simplify an algebraic expression to make it easier to evaluate or to use in some other way. To do so, we use the properties of real numbers. We can use the same properties in formulas because they contain algebraic expressions.

Example 1.1.13: Simplifying Algebraic Expressions

Simplify each algebraic expression.

  1. 3x2y+x3y7
  2. 2r5(3r)+4
  3. (4t54s)(23t+2s)
  4. 2mn5m+3mn+n
Solution
  1. 3x2y+x3y7=3x+x2y3y7Commutative property of addition=4x5y7Simplify
  2. 2r5(3r)+4=2r15+5r+4Distributive property=2r+5y15+4Commutative property of addition=7r11Simplify
  3. (4t54s)(23t+2s)=4t54s23t2sDistributive property=4t23t54s2sCommutative property of addition=103t134sSimplify
  4. 2mn5m+3mn+n=2mn+3mn5m+nCommutative property of addition=5mn5m+nSimplify
Exercise 1.1.12

Simplify each algebraic expression.

  1. 23y2(43y+z)
  2. 5t23t+1
  3. 4p(q1)+q(1p)
  4. 9r(s+2r)+(6s)
Answer
  1. 2y2z or 2(y+z)
  2. 2t1
  3. 3pq4p+q
  4. 7r−2s+6
Example \PageIndex{14}: Simplifying a Formula

A rectangle with length L and width W has a perimeter P given by P =L+W+L+W. Simplify this expression.

Solution

\begin{align*} P &=L+W+L+W\\ P &=L+L+W+W && \qquad \text{Commutative property of addition}\\ P &=2L+2W && \qquad \text{Simplify}\\ P &=2(L+W) && \qquad \text{Distributive property} \end{align*}

Exercise \PageIndex{13}

If the amount P is deposited into an account paying simple interest r for time t, the total value of the deposit A is given by A =P+Prt. Simplify the expression. (This formula will be explored in more detail later in the course.)

Answer

A=P(1+rt)

Access these online resources for additional instruction and practice with real numbers.

Key Concepts

  • Rational numbers may be written as fractions or terminating or repeating decimals. See Example and Example.
  • Determine whether a number is rational or irrational by writing it as a decimal. See Example.
  • The rational numbers and irrational numbers make up the set of real numbers. See Example. A number can be classified as natural, whole, integer, rational, or irrational. See Example.
  • The order of operations is used to evaluate expressions. See Example.
  • The real numbers under the operations of addition and multiplication obey basic rules, known as the properties of real numbers. These are the commutative properties, the associative properties, the distributive property, the identity properties, and the inverse properties. See Example.
  • Algebraic expressions are composed of constants and variables that are combined using addition, subtraction, multiplication, and division. See Example. They take on a numerical value when evaluated by replacing variables with constants. See Example,Example, and Example
  • Formulas are equations in which one quantity is represented in terms of other quantities. They may be simplified or evaluated as any mathematical expression. See Example and Example.

Glossary

algebraic expression
constants and variables combined using addition, subtraction, multiplication, and division
associative property of addition
the sum of three numbers may be grouped differently without affecting the result; in symbols,a+(b+c)=(a+b)+c
associative property of multiplication
the product of three numbers may be grouped differently without affecting the result; in symbols,a(bc)=(ab)c
base
in exponential notation, the expression that is being multiplied
commutative property of addition
two numbers may be added in either order without affecting the result; in symbols,a+b=b+a
commutative property of multiplication
two numbers may be multiplied in any order without affecting the result; in symbols,ab=ba
constant
a quantity that does not change value
distributive property
the product of a factor times a sum is the sum of the factor times each term in the sum; in symbols,a(b+c)=ab+ac
equation
a mathematical statement indicating that two expressions are equal
exponent
in exponential notation, the raised number or variable that indicates how many times the base is being multiplied
exponential notation
a shorthand method of writing products of the same factor
formula
an equation expressing a relationship between constant and variable quantities
identity property of addition
there is a unique number, called the additive identity, 0, which, when added to a number, results in the original number; in symbols,a+0=a
identity property of multiplication
there is a unique number, called the multiplicative identity, 1, which, when multiplied by a number, results in the original number; in symbols,a1=a
integers
the set consisting of the natural numbers, their opposites, and 0:{,−3,−2,−1,0,1,2,3,…}
inverse property of addition
for every real numbera,there is a unique number, called the additive inverse (or opposite), denoteda,which, when added to the original number, results in the additive identity, 0; in symbols,a+(a)=0
inverse property of multiplication
for every non-zero real numbera,there is a unique number, called the multiplicative inverse (or reciprocal), denoted1a,which, when multiplied by the original number, results in the multiplicative identity, 1; in symbols,a1a=1
irrational numbers
the set of all numbers that are not rational; they cannot be written as either a terminating or repeating decimal; they cannot be expressed as a fraction of two integers
natural numbers
the set of counting numbers:{1,2,3,…}
order of operations
a set of rules governing how mathematical expressions are to be evaluated, assigning priorities to operations
rational numbers
the set of all numbers of the formmn,wheremandnare integers andn0.Any rational number may be written as a fraction or a terminating or repeating decimal.
real number line
a horizontal line used to represent the real numbers. An arbitrary fixed point is chosen to represent 0; positive numbers lie to the right of 0 and negative numbers to the left.
real numbers
the sets of rational numbers and irrational numbers taken together
variable
a quantity that may change value
whole numbers
the set consisting of 0 plus the natural numbers:{0,1,2,3,…}

This page titled 1.1: Real Numbers - Algebra Essentials is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by OpenStax via source content that was edited to the style and standards of the LibreTexts platform.

Support Center

How can we help?