7.3: The BolzanoWeierstrass Theorem
 Page ID
 7960
Skills to Develop
 Explain the BolzanoWeierstrass Theorem
Once we introduced the Nested Interval Property, the Intermediate Value Theorem followed pretty readily. The proof of Extreme Value (which says that any continuous function \(f\) deﬁned on a closed interval \([a,b]\) must have a maximum and a minimum) takes a bit more work. First we need to show that such a function is bounded.
A continuous function deﬁned on a closed, bounded interval must be bounded. That is, let \(f\) be a continuous function deﬁned on \([a,b]\). Then there exists a positive real number \(B\) such that \(f(x)≤ B\) for all \(x ∈ [a,b]\).
 Sketch of Alleged Proof

Let’s assume, for contradiction, that there is no such bound \(B\). This says that for any positive integer \(n\), there must exist \(x_n ∈ [a,b]\) such that \(f(x_n) > n\). (Otherwise \(n\) would be a bound for \(f\).) IF the sequence (\(x_n\)) converged to something in \([a,b]\), say \(c\), then we would have our contradiction. Indeed, we would have \(\lim_{n \to \infty } x_n = c\). By the continuity of \(f\) at \(c\) and Theorem 6.2.1 of Chapter 6, we would have \(\lim_{n \to \infty } f(x_n) = f(c)\). This would say that the sequence (\(f(x_n)\)) converges, so by Lemma 4.2.2 of Chapter 4, it must be bounded. This would provide our contradiction, as we had \(f(x_n) > n\), for all positive integers \(n\).
This would all work well except for one little problem. The way it was constructed, there is no reason to expect the sequence (\(x_n\)) to converge to anything and we can’t make such an assumption. That is why we emphasized the IF above. Fortunately, this idea can be salvaged. While it is true that the sequence (\(x_n\)) may not converge, part of it will. We will need the following deﬁnition.
Definition
Let \(\left ( n_k \right )_{k=1}^{\infty }\) be a strictly increasing sequence of positive integers; that is, \(n_1 < n_2 < n_3 < ···\). If \(\left ( x_n \right )_{k=1}^{\infty }\) is a sequence, then \(\left ( x_{n_k} \right )_{k=1}^{\infty } = (x_{n_1}, x_{n_2}, x_{n_3}, \cdots )\) is called a subsequence of (\(x_n\)).
The idea is that a subsequence of a sequence is a part of the sequence, (\(x_n\)), which is itself a sequence. However, it is a little more restrictive. We can choose any term in our sequence to be part of the subsequence, but once we choose that term, we can’t go backwards. This is where the condition \(n_1 < n_2 < n_3 < ···\) comes in. For example, suppose we started our subsequence with the term \(x_{100}\). We could not choose our next term to be \(x_{99}\). The subscript of the next term would have to be greater than \(100\). In fact, the thing about a subsequence is that it is all in the subscripts; we are really choosing a subsequence (\(n_k\)) of the sequence of subscripts (\(n\)) in (\(x_n\)).
Example \(\PageIndex{1}\):
Given the sequence (\(x_n\)), the following are subsequences.
 \((x_2, x_4, x_6, ...) = (x_{2k})_{k=1}^\infty\)
 \((x_1, x_4, x_9, ...) = (x_{k^2})_{k=1}^\infty\)
 \((x_n)\) itself.
Example \(\PageIndex{2}\):
 \((x_1, x_1, x_1, ...)\)
 \((x_{99}, x_{100}, x_{99}, ...)\)
 \((x_1, x_2, x_3, ...)\)
The subscripts in the examples we have seen so far have a discernable pattern, but this need not be the case. For example,
\[(x_2, x_5, x_{12}, x_{14}, x_{23} ...)\]
would be a subsequence as long as the subscripts form an increasing sequence themselves.
Exercise \(\PageIndex{1}\)
Suppose \(\lim_{n \to \infty } x_n = c\). Prove that \(\lim_{k \to \infty } x_{n_k} = c\) for any subsequence (\(x_{n_k}\)) of (\(x_n\)).
 Hint

\(n_k \geq k\)
A very important theorem about subsequences was introduced by Bernhard Bolzano and, later, independently proven by Karl Weierstrass. Basically, this theorem says that any bounded sequence of real numbers has a convergent subsequence.
Theorem \(\PageIndex{2}\): The BolzanoWeierstrass Theorem
Let (\(x_n\)) be a sequence of real numbers such that \(x_n ∈ [a,b]\), \(∀ n\). Then there exists \(c ∈ [a,b]\) and a subsequence (\(x_{n_k}\)), such that \(\lim_{k \to \infty } x_{n_k} = c\).
 Sketch of Proof

Suppose we have our sequence (\(x_n\)) such that \(x_n ∈ [a,b]\), \(∀ n\). To ﬁnd our \(c\) for the subsequence to converge to we will use the NIP. Since we are already using (\(x_n\)) as our original sequence, we will need to use diﬀerent letters in setting ourselves up for the NIP. With this in mind, let \(a_1 = a\) and \(b_1 = b\), and notice that \(x_n ∈ [a_1,b_1]\) for inﬁnitely many \(n\). (This is, in fact true for all n, but you’ll see why we said it the way we did.) Let \(m_1\) be the midpoint of \([a_1,b_1]\) and notice that either \(x_n ∈ [a_1,m_1]\) for inﬁnitely many \(n\) or \(x_n ∈ [m_1,b_1]\) for inﬁnitely many \(n\). If \(x_n ∈ [a_1,m_1]\) for inﬁnitely many \(n\), then we relabel \(a_2 = a_1\) and \(b_2 = m_1\). If \(x_n ∈ [m_1,b_1]\) for inﬁnitely many \(n\), then relabel \(a_2 = m_1\) and \(b_2 = b_1\). In either case, we get \(a_1 ≤ a_2 ≤ b_2 ≤ b_1, b_2  a_2 = \frac{1}{2} (b_1  a_1)\), and \(x_n ∈ [a_2,b_2]\) for inﬁnitely many \(n\).
Now we consider the interval \([a_2,b_2]\) and let \(m_2\) be the midpoint of \([a_2,b_2]\). Since \(x_n ∈ [a_2,b_2]\) for inﬁnitely many \(n\), then either \(x_n ∈ [a_2,m_2]\) for inﬁnitely many \(n\) or \(x_n ∈ [m_2,b_2]\) for inﬁnitely many \(n\). If \(x_n ∈ [a_2,m_2]\) for inﬁnitely many \(n\), then we relabel \(a_3 = a_2\) and \(b_3 = m_2\). If \(x_n ∈ [m_2,b_2]\) for inﬁnitely many \(n\), then we relabel \(a_3 = m_2\) and \(b_3 = b_2\). In either case, we get \(a_1 ≤ a_2 ≤ a_3 ≤ b_3 ≤ b_2 ≤ b_1, b_3  a_3 = \frac{1}{2} (b_2  a_2) = \frac{1}{2^2} (b_1  a_1)\), and \(x_n ∈ [a_3,b_3]\) for inﬁnitely many \(n\).
If we continue in this manner, we will produce two sequences (\(a_k\)) and (\(b_k\)) with the following properties:
 \(a_1 ≤ a_2 ≤ a_3 ≤···\)
 \(b_1 ≥ b_2 ≥ b_3 ≥···\)
 \(∀ k\), \(a_k ≤ b_k\)
 \(\lim_{k \to \infty } (b_k  a_k) = \lim_{k \to \infty } \frac{1}{2^{k1}} (b_1  a_1) = 0\)
 For each \(k\), \(x_n ∈ [a_k,b_k]\) for inﬁnitely many \(n\)
By properties 15 and the NIP, there exists a unique \(c\) such that \(c ∈ [a_k,b_k]\),for all \(k\). In particular, \(c ∈ [a_1,b_1] = [a,b]\).
We have our \(c\). Now we need to construct a subsequence converging to it. Since \(x_n ∈ [a_1,b_1]\) for inﬁnitely many \(n\), choose an integer \(n_1\) such that \(x_{n_1} ∈ [a_1,b_1]\). Since \(x_n ∈ [a_2,b_2]\) for inﬁnitely many \(n\), choose an integer \(n_2 > n_1\) such that \(x_{n_2} ∈ [a_2,b_2]\). (Notice that to make a subsequence it is crucial that \(n_2 > n_1\), and this is why we needed to insist that \(x_n ∈ [a_2,b_2]\) for inﬁnitely many \(n\).) Continuing in this manner, we should be able to build a subsequence (\(x_{n_k}\)) that will converge to \(c\).
As an example of this theorem, consider the sequence
\[\left ( (1)^n \right ) = (1,1,1,1,...)\]
This sequence does not converge, but the subsequence
\[\left ( (1)^{2k} \right ) = (1,1,1,...)\]
\((1,1,1, ...)\) converges to \(1\). Notice that if the sequence is unbounded, then all bets are oﬀ; the sequence may have a convergent subsequence or it may not. The sequences \(\left ( ((1)^n + 1)n \right )\) and (\(n\)) represent these possibilities as the ﬁrst has, for example, \(\left ( ((1)^{2k+1} + 1)(2k+1) \right ) = (0, 0, 0, \cdots )\) and the second one has none.
The BolzanoWeierstrass Theorem says that no matter how “random” the sequence (\(x_n\)) may be, as long as it is bounded then some part of it must converge. This is very useful when one has some process which produces a “random” sequence such as what we had in the idea of the alleged proof in Theorem \(\PageIndex{1}\).
Exercise \(\PageIndex{2}\)
Turn the ideas of the above outline into a formal proof of the BolzanoWeierstrass Theorem.
Exercise \(\PageIndex{3}\)
Use the BolzanoWeierstrass Theorem to complete the proof of Theorem \(\PageIndex{1}\).
Contributor
Eugene Boman (Pennsylvania State University) and Robert Rogers (SUNY Fredonia)