1.4: Inverse Functions
 Page ID
 2481
\( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)
\( \newcommand{\vecd}[1]{\overset{\!\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)
An inverse function reverses the operation done by a particular function. In other words, whatever a function does, the inverse function undoes it. In this section, we define an inverse function formally and state the necessary conditions for an inverse function to exist. We examine how to find an inverse function and study the relationship between the graph of a function and the graph of its inverse. Then we apply these ideas to define and discuss properties of the inverse trigonometric functions.
Existence of an Inverse Function
We begin with an example. Given a function \(f\) and an output \(y=f(x)\), we are often interested in finding what value or values \(x\) were mapped to \(y\) by \(f\). For example, consider the function \(f(x)=x^3+4\). Since any output \(y=x^3+4\), we can solve this equation for \(x\) to find that the input is \(x=\sqrt[3]{y−4}\). This equation defines \(x\) as a function of \(y\). Denoting this function as \(f^{−1}\), and writing \(x=f^{−1}(y)=\sqrt[3]{y−4}\), we see that for any \(x\) in the domain of \(f,f^{−1}\)\(f(x))=f^{−1}(x^3+4)=x\). Thus, this new function, \(f^{−1}\), “undid” what the original function \(f\) did. A function with this property is called the inverse function of the original function.
Definition: Inverse Functions
Given a function \(f\) with domain \(D\) and range \(R\), its inverse function (if it exists) is the function \(f^{−1}\) with domain \(R\) and range \(D\) such that \(f^{−1}(y)=x\) if \(f(x)=y\). In other words, for a function \(f\) and its inverse \(f^{−1}\),
\(f^{−1}(f(x))=x\) for all \(x\) in \(D\), and \(f(f^{−1}(y))=y\) for all \(y\) in \(R\).
Note that \(f^{−1}\) is read as “f inverse.” Here, the \(−1\) is not used as an exponent and \(f^{−1}(x)≠1/f(x)\). Figure shows the relationship between the domain and range of f and the domain and range of \(f^{−1}\).
Figure \(\PageIndex{1}\): Given a function \(f\) and its inverse \(f^{−1},f^{−1}(y)=x\) if and only if \(f(x)=y\). The range of \(f\) becomes the domain of \(f^{−1}\) and the domain of f becomes the range of \(f^{−1}\).
Recall that a function has exactly one output for each input. Therefore, to define an inverse function, we need to map each input to exactly one output. For example, let’s try to find the inverse function for \(f(x)=x^2\). Solving the equation \(y=x^2\) for \(x\), we arrive at the equation \(x=±\sqrt{y}\). This equation does not describe \(x\) as a function of \(y\) because there are two solutions to this equation for every \(y>0\). The problem with trying to find an inverse function for \(f(x)=x^2\) is that two inputs are sent to the same output for each output \(y>0\). The function \(f(x)=x^3+4\) discussed earlier did not have this problem. For that function, each input was sent to a different output. A function that sends each input to a different output is called a onetoone function.
Definition: OnetoOne functions
We say a \(f\) is a onetoone function if \(f(x_1)≠f(x_2)\) when \(x_1≠x_2\).
One way to determine whether a function is onetoone is by looking at its graph. If a function is onetoone, then no two inputs can be sent to the same output. Therefore, if we draw a horizontal line anywhere in the \(xy\)plane, according to the horizontal line test, it cannot intersect the graph more than once. We note that the horizontal line test is different from the vertical line test. The vertical line test determines whether a graph is the graph of a function. The horizontal line test determines whether a function is onetoone (Figure).
Horizontal Line Test
A function \(f\) is onetoone if and only if every horizontal line intersects the graph of \(f\) no more than once.
Figure \(\PageIndex{2}\): (a) The function \(f(x)=x^2\) is not onetoone because it fails the horizontal line test. (b) The function \(f(x)=x^3\) is onetoone because it passes the horizontal line test.
Example \(\PageIndex{1}\): Determining Whether a Function Is OnetoOne
For each of the following functions, use the horizontal line test to determine whether it is onetoone.
a)
b)
Solution:
a) Since the horizontal line \(y=n\) for any integer \(n≥0\) intersects the graph more than once, this function is not onetoone.
b) Since every horizontal line intersects the graph once (at most), this function is onetoone.
Exercise \(\PageIndex{1}\)
Is the function \(f\) graphed in the following image onetoone?
 Solution

Use the horizontal line test.
 Answer

No
Finding a Function’s Inverse
We can now consider onetoone functions and show how to find their inverses. Recall that a function maps elements in the domain of \(f\) to elements in the range of \(f\). The inverse function maps each element from the range of \(f\) back to its corresponding element from the domain of \(f\). Therefore, to find the inverse function of a onetoone function \(f\), given any \(y\) in the range of \(f\), we need to determine which \(x\) in the domain of \(f\) satisfies \(f(x)=y\). Since \(f\) is onetoone, there is exactly one such value \(x\). We can find that value \(x\) by solving the equation \(f(x)=y\) for \(x\). Doing so, we are able to write \(x\) as a function of \(y\) where the domain of this function is the range of \(f\) and the range of this new function is the domain of \(f\). Consequently, this function is the inverse of \(f\), and we write \(x=f^{−1}(y)\). Since we typically use the variable x to denote the independent variable and y to denote the dependent variable, we often interchange the roles of \(x\) and \(y\), and write \(y=f^{−1}(x)\). Representing the inverse function in this way is also helpful later when we graph a function f and its inverse \(f^{−1}\) on the same axes.
ProblemSolving Strategy: Finding an Inverse Function
 Solve the equation \(y=f(x)\) for \(x\).
 Interchange the variables \(x\) and \(y\) and write \(y=f^{−1}(x)\).
Example \(\PageIndex{2}\): Finding an Inverse Function
Find the inverse for the function \(f(x)=3x−4.\) State the domain and range of the inverse function. Verify that \(f^{−1}(f(x))=x.\)
Solution
Follow the steps outlined in the strategy.
Step 1. \(If y=3x−4,\) then \(3x=y+4\) and \(x=\frac{1}{3}y+\frac{4}{3}.\)
Step 2. Rewrite as \(y=\frac{1}{3}x+\frac{4}{3}\) and let \(y=f^{−1}(x)\).Therefore, \(f^{−1}(x)=\frac{1}{3}x+\frac{4}{3}\).
Since the domain of \(f\) is \((−∞,∞)\), the range of \(f^{−1}\) is \((−∞,∞)\). Since the range of \(f\) is \((−∞,∞)\), the domain of \(f^{−1}\) is \((−∞,∞)\).
You can verify that \(f^{−1}(f(x))=x\) by writing
\(f^{−1}(f(x))=f^{−1}(3x−4)=\frac{1}{3}(3x−4)+\frac{4}{3}=x−\frac{4}{3}+\frac{4}{3}=x.\)
Note that for \(f^{−1}(x)\) to be the inverse of \(f(x)\), both \(f^{−1}(f(x))=x\) and \(f(f^{−1}(x))=x\) for all \(x\) in the domain of the inside function.
Exercise \(\PageIndex{2}\)
Find the inverse of the function \(f(x)=3x/(x−2)\). State the domain and range of the inverse function.
 Hint

Use the ProblemSolving Strategy for finding inverse functions.
 Answer

\(f^{−1}(x)=\frac{2x}{x−3}\). The domain of \(f^{−1}\) is \({xx≠3}\). The range of \(f^{−1}\) is \({yy≠2}\).
Graphing Inverse Functions
Let’s consider the relationship between the graph of a function \(f\) and the graph of its inverse. Consider the graph of \(f\) shown in Figure and a point \((a,b)\) on the graph. Since \(b=f(a)\), then \(f^{−1}(b)=a\). Therefore, when we graph \(f^{−1}\), the point \((b,a)\) is on the graph. As a result, the graph of \(f^{−1}\) is a reflection of the graph of f about the line \(y=x\).
Figure \(\PageIndex{3}\): (a) The graph of this function \(f\) shows point \((a,b)\) on the graph of \(f\). (b) Since \((a,b)\) is on the graph of \(f\), the point \((b,a)\) is on the graph of \(f^{−1}\). The graph of \(f^{−1}\) is a reflection of the graph of \(f\) about the line \(y=x\).
Example \(\PageIndex{3}\): Sketching Graphs of Inverse Functions
For the graph of \(f\) in the following image, sketch a graph of \(f^{−1}\) by sketching the line \(y=x\) and using symmetry. Identify the domain and range of \(f^{−1}\).
Solution
Reflect the graph about the line \(y=x\). The domain of \(f^{−1}\) is \([0,∞)\). The range of \(f^{−1}\) is \([−2,∞)\). By using the preceding strategy for finding inverse functions, we can verify that the inverse function is \(f^{−1}(x)=x^2−2\), as shown in the graph.
Exercise \(\PageIndex{3}\)
Sketch the graph of \(f(x)=2x+3\) and the graph of its inverse using the symmetry property of inverse functions.
 Hint

The graphs are symmetric about the line \(y=x\)
 Answer

Restricting Domains
As we have seen, \(f(x)=x^2\) does not have an inverse function because it is not onetoone. However, we can choose a subset of the domain of f such that the function is onetoone. This subset is called a restricted domain. By restricting the domain of \(f\), we can define a new function g such that the domain of \(g\) is the restricted domain of f and \(g(x)=f(x)\) for all \(x\) in the domain of \(g\). Then we can define an inverse function for g on that domain. For example, since \(f(x)=x^2\) is onetoone on the interval \([0,∞)\), we can define a new function g such that the domain of \(g\) is \([0,∞)\) and \(g(x)=x^2\) for all \(x\) in its domain. Since \(g\) is a onetoone function, it has an inverse function, given by the formula \(g^{−1}(x)=\sqrt{x}\). On the other hand, the function \(f(x)=x^2\) is also onetoone on the domain \((−∞,0]\). Therefore, we could also define a new function \(h\) such that the domain of \(h\) is \((−∞,0]\) and \(h(x)=x^2\) for all \(x\) in the domain of \(h\). Then \(h\) is a onetoone function and must also have an inverse. Its inverse is given by the formula \(h^{−1}(x)=−\sqrt{x}\) (Figure).
Figure \(\PageIndex{4}\): (a) For \(g(x)=x^2\) restricted to \([0,∞)\),\(g^{−1}(x)=\sqrt{x}\). (b) For \(h(x)=x^2\) restricted to \((−∞,0]\),\(h^{−1}(x)=−\sqrt{x}\).
Example \(\PageIndex{4}\): Restricting the Domain
Consider the function \(f(x)=(x+1)^2\).
 Sketch the graph of \(f\) and use the horizontal line test to show that \(f\) is not onetoone.
 Show that \(f\) is onetoone on the restricted domain \([−1,∞)\). Determine the domain and range for the inverse of \(f\) on this restricted domain and find a formula for \(f^{−1}\).
Solution
a) The graph of \(f\) is the graph of \(y=x^2\) shifted left \(1\) unit. Since there exists a horizontal line intersecting the graph more than once, \(f\) is not onetoone.
b) On the interval [−1,∞),f is onetoone.
The domain and range of \(f^{−1}\) are given by the range and domain of \(f\), respectively. Therefore, the domain of \(f^{−1}\) is \([0,∞)\) and the range of \(f^{−1}\) is \([−1,∞)\). To find a formula for \(f^{−1}\), solve the equation \(y=(x+1)^2\) for x. If \(y=(x+1)^2\), then \(x=−1±\sqrt{y}\). Since we are restricting the domain to the interval where \(x≥−1\), we need \(±\sqrt{y}≥0\). Therefore, \(x=−1+\sqrt{y}\). Interchanging \(x\) and \(y\), we write \(y=−1+\sqrt{x}\) and conclude that \(f^{−1}(x)=−1+\sqrt{x}\).
Exercise \(\PageIndex{4}\)
Consider \(f(x)=1/x^2\) restricted to the domain \((−∞,0)\). Verify that \(f\) is onetoone on this domain. Determine the domain and range of the inverse of \(f\) and find a formula for \(f^{−1}\).
 Hint

The domain and range of \(f^{−1}\) is given by the range and domain of \(f\), respectively. To find \(f^{−1}\), solve \(y=1/x^2\) for \(x\).
 Answer

The domain of \(f^{−1}\) is \((0,∞)\). The range of \(f^{−1}\) is \((−∞,0)\). The inverse function is given by the formula \(f^{−1}(x)=−1/\sqrt{x}\).
Inverse Trigonometric Functions
The six basic trigonometric functions are periodic, and therefore they are not onetoone. However, if we restrict the domain of a trigonometric function to an interval where it is onetoone, we can define its inverse. Consider the sine function ([link]). The sine function is onetoone on an infinite number of intervals, but the standard convention is to restrict the domain to the interval \([−\frac{π}{2},\frac{π}{2}]\).By doing so, we define the inverse sine function on the domain \([−1,1]\) such that for any \(x\) in the interval \([−1,1]\), the inverse sine function tells us which angle \(θ\) in the interval \([−\frac{π}{2},\frac{π}{2}]\) satisfies \(sinθ=x\). Similarly, we can restrict the domains of the other trigonometric functions to define inverse trigonometric functions, which are functions that tell us which angle in a certain interval has a specified trigonometric value.
Definition
The inverse sine function, denoted \(\sin^{−1}\) or arcsin, and the inverse cosine function, denoted \(\cos^{−1}\) or arccos, are defined on the domain \(D={x−1≤x≤1}\) as follows:
\(\sin^{−1}(x)=y\) if and only if \(\sin(y)=x\) and \(−\frac{π}{2}≤y≤\frac{π}{2}\);
\(cos^{−1}(x)=y\) if and only if \(\cos(y)=x\) and \(0≤y≤π\).
The inverse tangent function, denoted \(tan^{−1}\)or arctan, and inverse cotangent function, denoted \(cot^{−1}\) or arccot, are defined on the domain \(D={x−∞<x<∞}\) as follows:
\(tan^{−1}(x)=y\) if and only if \(tan(y)=x\) and \(−\frac{π}{2}<y<\frac{π}{2}\);
\(cot^{−1}(x)=y\) if and only if \(cot(y)=x\) and \(0<y<π\).
The inverse cosecant function, denoted \(csc^{−1}\) or arccsc, and inverse secant function, denoted \(sec^{−1}\) or arcsec, are defined on the domain \(D={xx≥1}\) as follows:
\(csc^{−1}(x)=y\) if and only if \(csc(y)=x\) and \(−\frac{π}{2}≤y≤\frac{π}{2}, y≠0\);
\(sec^{−1}(x)=y\) if and only if \(sec(y)=x\) and\(0≤y≤π, y≠π/2\).
To graph the inverse trigonometric functions, we use the graphs of the trigonometric functions restricted to the domains defined earlier and reflect the graphs about the line \(y=x\) (Figure).
Figure \(\PageIndex{5}\): The graph of each of the inverse trigonometric functions is a reflection about the line \(y=x\) of the corresponding restricted trigonometric function.
When evaluating an inverse trigonometric function, the output is an angle. For example, to evaluate \(cos^{−1}(12)\), we need to find an angle \(θ\) such that \(cosθ=\frac{1}{2}\). Clearly, many angles have this property. However, given the definition of \(cos^{−1}\), we need the angle \(θ\) that not only solves this equation, but also lies in the interval \([0,π]\). We conclude that \(cos^{−1}(\frac{1}{2})=\frac{π}{3}\).
We now consider a composition of a trigonometric function and its inverse. For example, consider the two expressions \(\sin(\sin^{−1}(\frac{\sqrt{2}}{2}))\) and \(\sin^{−1}(\sin(π)).\)
For the first one, we simplify as follows:
\[\sin(\sin^{−1}(\frac{\sqrt{2}}{2}))=\sin(\frac{π}{4})=\frac{\sqrt{2}}{2}.\]
For the second one, we have
\[\sin^{−1}(\sin(π))=\sin^{−1}(0)=0.\]
The inverse function is supposed to “undo” the original function, so why isn’t \(\sin^{−1}(\sin(π))=π?\) Recalling our definition of inverse functions, a function \(f\) and its inverse \(f^{−1}\) satisfy the conditions \(f(f^{−1}(y))=y\) for all \(y\) in the domain of \(f^{−1}\) and \(f^{−1}(f(x))=x\) for all \(x\) in the domain of \(f\), so what happened here? The issue is that the inverse sine function, \(\sin^{−1}\), is the inverse of the restricted sine function defined on the domain \([−\frac{π}{2},\frac{π}{2}]\). Therefore, for \(x\) in the interval \([−\frac{π}{2},\frac{π}{2}]\), it is true that \(\sin^{−1}(\sin x)=x\). However, for values of \(x\) outside this interval, the equation does not hold, even though \(\sin^{−1}(\sin x)\) is defined for all real numbers \(x\).
What about \(\sin(\sin^{−1}y)?\) Does that have a similar issue? The answer is no. Since the domain of sin−1 is the interval \([−1,1]\), we conclude that \(\sin(\sin^{−1}y)=y\) if \(−1≤y≤1\) and the expression is not defined for other values of \(y\). To summarize,
\(\sin(\sin^{−1}y)=y\) if \(−1≤y≤1\)
and
\((\sin^{−1}(\sin x)=x\) if \(−\frac{π}{2}≤x≤\frac{π}{2}.\)
Similarly, for the cosine function,
\(\cos(cos^{−1}y)=y\) if \(−1≤y≤1\)
and
\(cos^{−1}(\cos x)=x\) if \(0≤x≤π.\)
Similar properties hold for the other trigonometric functions and their inverses.
Example \(\PageIndex{5}\): Evaluating Expressions Involving Inverse Trigonometric Functions
Evaluate each of the following expressions.
 \(\sin^{−1}(−\frac{\sqrt{3}}{2})\)
 \(tan(tan^{−1}(−\frac{1}{\sqrt{3}}))\)
 \(cos^{−1}(\cos(\frac{5π}{4}))\)
 \(\sin^{−1}(\cos(\frac{2π}{3}))\)
Solution
 Evaluating \(\sin^{−1}(−\sqrt{3}/2)\) is equivalent to finding the angle \(θ\) such that \(sinθ=−\sqrt{3}/2\) and \(−π/2≤θ≤π/2\). The angle \(θ=−π/3\) satisfies these two conditions. Therefore, \(\sin^{−1}(−\sqrt{3}/2)=−π/3\).
 First we use the fact that \(tan^{−1}(−1/3√)=−π/6.\) Then \(tan(π/6)=−1/\sqrt{3}\). Therefore, \(tan(tan^{−1}(−1/\sqrt{3}))=−1/\sqrt{3}\).
 To evaluate \(cos^{−}1(\cos(5π/4))\),first use the fact that \(\cos(5π/4)=−\sqrt{2}/2\). Then we need to find the angle \(θ\) such that \(\cos(θ)=−\sqrt{2}/2\) and \(0≤θ≤π\). Since \(3π/4\) satisfies both these conditions, we have \(\cos(cos^{−1}(5π/4))=\cos(cos^{−1}(−\sqrt{2}√2))=3π/4\).
 Since \(\cos(2π/3)=−1/2\), we need to evaluate \(\sin^{−1}(−1/2)\). That is, we need to find the angle \(θ\) such that \(\sin(θ)=−1/2\) and \(−π/2≤θ≤π/2\). Since \(−π/6\) satisfies both these conditions, we can conclude that \(\sin^{−1}(\cos(2π/3))=\sin^{−1}(−1/2)=−π/6.\)
The Maximum Value of a Function
In many areas of science, engineering, and mathematics, it is useful to know the maximum value a function can obtain, even if we don’t know its exact value at a given instant. For instance, if we have a function describing the strength of a roof beam, we would want to know the maximum weight the beam can support without breaking. If we have a function that describes the speed of a train, we would want to know its maximum speed before it jumps off the rails. Safe design often depends on knowing maximum values.
This project describes a simple example of a function with a maximum value that depends on two equation coefficients. We will see that maximum values can depend on several factors other than the independent variable x.
1. Consider the graph in Figure of the function \(y=\sin x+\cos x.\) Describe its overall shape. Is it periodic? How do you know?
Figure \(\PageIndex{6}\): The graph of y=\sin x+\cos x.
Using a graphing calculator or other graphing device, estimate the \(x\) and \(y\)values of the maximum point for the graph (the first such point where x > 0). It may be helpful to express the \(x\)value as a multiple of π.
2. Now consider other graphs of the form \(y=A\sin x+B\cos x\) for various values of A and B. Sketch the graph when A = 2 and B = 1, and find the x and yvalues for the maximum point. (Remember to express the xvalue as a multiple of π, if possible.) Has it moved?
3. Repeat for A = 1, B = 2. Is there any relationship to what you found in part (2)?
4. Complete the following table, adding a few choices of your own for A and B:
\(A\)  \(B\)  \(x\)  \(y\)  \(A\)  \(B\)  \(x\)  \(y\) 

0  1  3  4  
1  0  4  3  
1  1  \(\sqrt{3}\)  1  
1  2  1  \(\sqrt{3}\)  
2  1  12  5  
2  2  5  12 
5. Try to figure out the formula for the \(y\)values.
6. The formula for the \(x\)values is a little harder. The most helpful points from the table are \((1,1),(1,\sqrt{3}),(\sqrt{3},1).\) (Hint: Consider inverse trigonometric functions.)
7. If you found formulas for parts (5) and (6), show that they work together. That is, substitute the \(x\) value formula you found into \(y=A\sin x+B\cos x\) and simplify it to arrive at the \(y\)value formula you found.
Key Concepts
 For a function to have an inverse, the function must be onetoone. Given the graph of a function, we can determine whether the function is onetoone by using the horizontal line test.
 If a function is not onetoone, we can restrict the domain to a smaller domain where the function is onetoone and then define the inverse of the function on the smaller domain.
 For a function \(f\) and its inverse \(f^{−1},f(f−1(x))=x\) for all \(x\) in the domain of \(f^{−1}\) and \(f^{−1}(f(x))=x\) for all \(x\) in the domain of \(f\).
 Since the trigonometric functions are periodic, we need to restrict their domains to define the inverse trigonometric functions.
 The graph of a function \(f\) and its inverse \(f^{−1}\) are symmetric about the line \(y=x.\)
Key Equations
 Inverse function
\(f^{−1}(f(x))=x\) for all \(x\) in \(D,\) and \(f(f^{−1}(y))=y\) for all \(y\) in \(R\).
Glossary
 horizontal line test
 a function \(f\) is onetoone if and only if every horizontal line intersects the graph of \(f\),at most, once
 inverse function
 for a function \(f\), the inverse function \(f^{−1}\) satisfies \(f^{−1}(y)=x\) if \(f(x)=y\)
 inverse trigonometric functions
 the inverses of the trigonometric functions are defined on restricted domains where they are onetoone functions
 onetoone function
 a function \(f\) is onetoone if \(f(x_1)≠f(x_2)\) if \(x_1≠x_2\)
 restricted domain
 a subset of the domain of a function f
Contributors
Gilbert Strang (MIT) and Edwin “Jed” Herman (Harvey Mudd) with many contributing authors. This content by OpenStax is licensed with a CCBY 3/0 license. Download for free at http://cnx.org.