1.2: The Rectangular Coordinate Systems and Graphs
 Last updated
 Save as PDF
 Page ID
 29105
 Contributed by Jay Abramson
 Principal Lecturer (School of Mathematical and Statistical Sciences) at Arizona State University
 Publisher: OpenStax CNX
Learning Objectives
 Plot ordered pairs in a Cartesian coordinate system.
 Graph equations by plotting points.
 Graph equations with a graphing utility.
 Find \(x\)intercepts and \(y\)intercepts.
 Use the distance formula.
 Use the midpoint formula.
Tracie set out from Elmhurst, IL, to go to Franklin Park. On the way, she made a few stops to do errands. Each stop is indicated by a red dot in Figure \(\PageIndex{1}\). Laying a rectangular coordinate grid over the map, we can see that each stop aligns with an intersection of grid lines. In this section, we will learn how to use grid lines to describe locations and changes in locations.
Plotting Ordered Pairs in the Cartesian Coordinate System
An old story describes how seventeenthcentury philosopher/mathematician René Descartes invented the system that has become the foundation of algebra while sick in bed. According to the story, Descartes was staring at a fly crawling on the ceiling when he realized that he could describe the fly’s location in relation to the perpendicular lines formed by the adjacent walls of his room. He viewed the perpendicular lines as horizontal and vertical axes. Further, by dividing each axis into equal unit lengths, Descartes saw that it was possible to locate any object in a twodimensional plane using just two numbers—the displacement from the horizontal axis and the displacement from the vertical axis.
While there is evidence that ideas similar to Descartes’ grid system existed centuries earlier, it was Descartes who introduced the components that comprise the Cartesian coordinate system, a grid system having perpendicular axes. Descartes named the horizontal axis the \(x\)axis and the vertical axis the \(y\)axis.
The Cartesian coordinate system, also called the rectangular coordinate system, is based on a twodimensional plane consisting of the \(x\)axis and the \(y\)axis. Perpendicular to each other, the axes divide the plane into four sections. Each section is called a quadrant; the quadrants are numbered counterclockwise as shown in Figure \(\PageIndex{2}\).
The center of the plane is the point at which the two axes cross. It is known as the origin, or point \((0,0)\). From the origin, each axis is further divided into equal units: increasing, positive numbers to the right on the \(x\)axis and up the \(y\)axis; decreasing, negative numbers to the left on the \(x\)axis and down the \(y\)axis. The axes extend to positive and negative infinity as shown by the arrowheads in Figure \(\PageIndex{3}\).
Each point in the plane is identified by its \(x\)coordinate, or horizontal displacement from the origin, and its \(y\)coordinate, or vertical displacement from the origin. Together, we write them as an ordered pair indicating the combined distance from the origin in the form \((x,y)\). An ordered pair is also known as a coordinate pair because it consists of \(x\) and \(y\)coordinates. For example, we can represent the point \((3,−1)\) in the plane by moving three units to the right of the origin in the horizontal direction, and one unit down in the vertical direction. See Figure \(\PageIndex{4}\).
When dividing the axes into equally spaced increments, note that the \(x\)axis may be considered separately from the \(y\)axis. In other words, while the \(x\)axis may be divided and labeled according to consecutive integers, the \(y\)axis may be divided and labeled by increments of \(2\), or \(10\), or \(100\). In fact, the axes may represent other units, such as years against the balance in a savings account, or quantity against cost, and so on. Consider the rectangular coordinate system primarily as a method for showing the relationship between two quantities.
Cartesian Coordinate System
A twodimensional plane where the
 \(x\)axis is the horizontal axis
 \(y\)axis is the vertical axis
A point in the plane is defined as an ordered pair, \((x,y)\), such that \(x\) is determined by its horizontal distance from the origin and \(y\) is determined by its vertical distance from the origin.
Example \(\PageIndex{1}\): Plotting Points in a Rectangular Coordinate System
Plot the points \((−2,4)\), \((3,3)\), and \((0,−3)\) in the plane.
Solution
To plot the point \((−2,4)\), begin at the origin. The \(x\)coordinate is \(–2\), so move two units to the left. The \(y\)coordinate is \(4\), so then move four units up in the positive \(y\) direction.
To plot the point \((3,3)\), begin again at the origin. The \(x\)coordinate is \(3\), so move three units to the right. The \(y\)coordinate is also \(3\), so move three units up in the positive \(y\) direction.
To plot the point \((0,−3)\), begin again at the origin. The \(x\)coordinate is \(0\). This tells us not to move in either direction along the \(x\)axis. The \(y\)coordinate is \(–3\), so move three units down in the negative \(y\) direction. See the graph in Figure \(\PageIndex{5}\).
AnalysisNote that when either coordinate is zero, the point must be on an axis. If the \(x\)coordinate is zero, the point is on the \(y\)axis. If the \(y\)coordinate is zero, the point is on the \(x\)axis.
Graphing Equations by Plotting Points
We can plot a set of points to represent an equation. When such an equation contains both an \(x\) variable and a \(y\) variable, it is called an equation in two variables. Its graph is called a graph in two variables. Any graph on a twodimensional plane is a graph in two variables.
Suppose we want to graph the equation \(y=2x−1\). We can begin by substituting a value for \(x\) into the equation and determining the resulting value of \(y\). Each pair of \(x\) and \(y\)values is an ordered pair that can be plotted. Table \(\PageIndex{1}\) lists values of \(x\) from \(–3\) to \(3\) and the resulting values for \(y\).
\(x\)  \(y=2x−1\)  \((x,y)\) 

\(−3\)  \(y=2(−3)−1=−7\)  \((−3,−7)\) 
\(−2\)  \(y=2(−2)−1=−5\)  \((−2,−5)\) 
\(−1\)  \(y=2(−1)−1=−3\)  \((−1,−3)\) 
\(0\)  \(y=2(0)−1=−1\)  \((0,−1)\) 
\(1\)  \(y=2(1)−1=1\)  \((1,1)\) 
\(2\)  \(y=2(2)−1=3\)  \((2,3)\) 
\(3\)  \(y=2(3)−1=5\)  \((3,5)\) 
We can plot the points in the table. The points for this particular equation form a line, so we can connect them (Figure \(\PageIndex{6}\)). This is not true for all equations.
Note that the \(x\)values chosen are arbitrary, regardless of the type of equation we are graphing. Of course, some situations may require particular values of \(x\) to be plotted in order to see a particular result. Otherwise, it is logical to choose values that can be calculated easily, and it is always a good idea to choose values that are both negative and positive. There is no rule dictating how many points to plot, although we need at least two to graph a line. Keep in mind, however, that the more points we plot, the more accurately we can sketch the graph.
Howto: Given an equation, graph by plotting points
 Make a table with one column labeled \(x\), a second column labeled with the equation, and a third column listing the resulting ordered pairs.
 Enter \(x\)values down the first column using positive and negative values. Selecting the \(x\)values in numerical order will make the graphing simpler.
 Select \(x\)values that will yield \(y\)values with little effort, preferably ones that can be calculated mentally.
 Plot the ordered pairs.
 Connect the points if they form a line.
Example \(\PageIndex{2}\): Graphing an Equation in Two Variables by Plotting Points
Graph the equation \(y=−x+2\) by plotting points.
Solution
First, we construct a table similar to Table \(\PageIndex{2}\). Choose \(x\) values and calculate \(y\).
\(x\)  \(y=−x+2\)  \((x,y)\) 

\(−5\)  \(y=−(−5)+2=7\)  \((−5,7)\) 
\(−3\)  \(y=−(−3)+2=5\)  \((−3,5)\) 
\(−1\)  \(y=−(−1)+2=3\)  \((−1,3)\) 
\(0\)  \(y=−(0)+2=2\)  \((0,2)\) 
\(1\)  \(y=−(1)+2=1\)  \((1,1)\) 
\(3\)  \(y=−(3)+2=−1\)  \((3,−1)\) 
\(5\)  \(y=−(5)+2=−3\)  \((5,−3)\) 
Now, plot the points. Connect them if they form a line. See Figure \(\PageIndex{7}\).
Exercise \(\PageIndex{1}\)
Construct a table and graph the equation by plotting points: \(y=\dfrac{1}{2}x+2\).
 Answer

Please see Table \(\PageIndex{3}\) and graph below.
Table \(\PageIndex{3}\) \(x\) \(y = 12x + 2\) \((x,y)\) \(2\) \(y=12(−2)+2=1\) \((−2,1)\) \(1\) \(y=12(−1)+2=32\) \((−1,32)\) \(0\) \(y=12(0)+2=2\) \((0,2)\) \(1\) \(y=12(1)+2=52\) \((1,52)\) \(2\) \(y=12(2)+2=3\) \((2,3)\)
Graphing Equations with a Graphing Utility
Most graphing calculators require similar techniques to graph an equation. The equations sometimes have to be manipulated so they are written in the style \(y=\)_____ . The TI84 Plus, and many other calculator makes and models, have a mode function, which allows the window (the screen for viewing the graph) to be altered so the pertinent parts of a graph can be seen.
For example, the equation \(y=2x−20\) has been entered in the TI84 Plus shown in Figure \(\PageIndex{9a}\). In Figure \(\PageIndex{9b}\), the resulting graph is shown. Notice that we cannot see on the screen where the graph crosses the axes. The standard window screen on the TI84 Plus shows \(−10≤x≤10\), and \(−10≤y≤10\). See Figure \(\PageIndex{9c}\).
By changing the window to show more of the positive \(x\)axis and more of the negative \(y\)axis, we have a much better view of the graph and the \(x\) and \(y\)intercepts. See Figure \(\PageIndex{10a}\) and Figure \(\PageIndex{10b}\).
Example \(\PageIndex{3}\): Using a Graphing Utility to Graph an Equation
Use a graphing utility to graph the equation: \(y=−\dfrac{2}{3}x−\dfrac{4}{3}\).
Solution
Enter the equation in the \(y = \text{ function}\) of the calculator. Set the window settings so that both the \(x\) and \(y\) intercepts are showing in the window. See Figure \(\PageIndex{11}\).
Finding \(x\)intercepts and \(y\)intercepts
The intercepts of a graph are points at which the graph crosses the axes. The \(x\)intercept is the point at which the graph crosses the \(x\)axis. At this point, the \(y\)coordinate is zero. The \(y\)intercept is the point at which the graph crosses the \(y\)axis. At this point, the \(x\)coordinate is zero.
To determine the \(x\)intercept, we set \(y\) equal to zero and solve for \(x\). Similarly, to determine the \(y\)intercept, we set \(x\) equal to zero and solve for \(y\). For example, lets find the intercepts of the equation \(y=3x−1\).
To find the \(x\)intercept, set \(y=0\).
\[\begin{align*} y &= 3x  1\\ 0 &= 3x  1\\ 1 &= 3x\\ \dfrac{1}{3}&= x \end{align*}\]
\(x\)−intercept: \(\left(\dfrac{1}{3},0\right)\)
To find the \(y\)intercept, set \(x=0\).
\[\begin{align*} y &= 3x  1\\ y &= 3(0)  1\\ y &= 1 \end{align*}\]
\(y\)−intercept: \((0,−1)\)
We can confirm that our results make sense by observing a graph of the equation as in Figure \(\PageIndex{12}\). Notice that the graph crosses the axes where we predicted it would.
Howto: GIVEN AN EQUATION, FIND THE INTERCEPTS
 Find the \(x\)intercept by setting \(y=0\) and solving for \(x\).
 Find the \(y\)intercept by setting \(x=0\) and solving for \(y\).
Example \(\PageIndex{4}\): Finding the Intercepts of the Given Equation
Find the intercepts of the equation \(y=−3x−4\). Then sketch the graph using only the intercepts.
Solution
Set \(y=0\) to find the \(x\)intercept.
\[\begin{align*} y &= 3x  4\\ 0 &= 3x  4\\ 4 &= 3x\\ \dfrac{4}{3}&= x \end{align*}\]
\(x\)−intercept: \(\left(−\dfrac{4}{3},0\right)\)
Set \(x=0\) to find the \(y\)intercept.
\[\begin{align*} y &= 3x  4\\ y &= 3(0)  4\\ y &= 4 \end{align*}\]
\(y\)−intercept: \((0,−4)\)
Plot both points, and draw a line passing through them as in Figure \(\PageIndex{13}\).
Exercise \(\PageIndex{2}\)
Find the intercepts of the equation and sketch the graph: \(y=−\dfrac{3}{4}x+3\).
 Answer

\(x\)intercept is \((4,0)\); \(y\)intercept is \((0,3)\)
Using the Distance Formula
Derived from the Pythagorean Theorem, the distance formula is used to find the distance between two points in the plane. The Pythagorean Theorem, \(a^2+b^2=c^2\), is based on a right triangle where \(a\) and \(b\) are the lengths of the legs adjacent to the right angle, and \(c\) is the length of the hypotenuse. See Figure \(\PageIndex{15}\).
The relationship of sides \(x_2−x_1\) and \(y_2−y_1\) to side \(d\) is the same as that of sides \(a\) and \(b\) to side \(c\). We use the absolute value symbol to indicate that the length is a positive number because the absolute value of any number is positive. (For example, \(3=3\). ) The symbols \(x_2−x_1\) and \(y_2−y_1\) indicate that the lengths of the sides of the triangle are positive. To find the length \(c\), take the square root of both sides of the Pythagorean Theorem.
\[c^2=a^2+b^2\rightarrow c=\sqrt{a^2+b^2}\]
It follows that the distance formula is given as
\[d^2={(x_2−x_1)}^2+{(y_2−y_1)}^2\rightarrow d=\sqrt{{(x_2−x_1)}^2+{(y_2−y_1)}^2}\]
We do not have to use the absolute value symbols in this definition because any number squared is positive.
distance between two points
Given endpoints \((x_1,y_1)\) and \((x_2,y_2)\), the distance between two points is given by
\[d=\sqrt{{(x_2−x_1)}^2+{(y_2−y_1)}^2}\]
Example \(\PageIndex{5}\): Finding the Distance between Two Points
Find the distance between the points \((−3,−1)\) and \((2,3)\).
Solution
Let us first look at the graph of the two points. Connect the points to form a right triangle as in Figure \(\PageIndex{16}\)
Then, calculate the length of \(d\) using the distance formula.
\[\begin{align*} d&= \sqrt{{(x_2  x_1)}^2+{(y_2  y_1)}^2}\\ &= \sqrt{{(2(3))}^2+{(3(1))}^2}\\ &= \sqrt{{(5)}^2+{(4)}^2}\\ &= \sqrt{25+16}\\ &= \sqrt{41} \end{align*}\]
Exercise \(\PageIndex{3}\)
Find the distance between two points: \((1,4)\) and \((11,9)\).
 Answer

\(\sqrt{125}=5\sqrt{5}\)
Example \(\PageIndex{6}\): Finding the Distance between Two Locations
Let’s return to the situation introduced at the beginning of this section.
Tracie set out from Elmhurst, IL, to go to Franklin Park. On the way, she made a few stops to do errands. Each stop is indicated by a red dot in Figure \(\PageIndex{1}\). Find the total distance that Tracie traveled. Compare this with the distance between her starting and final positions.
Solution
The first thing we should do is identify ordered pairs to describe each position. If we set the starting position at the origin, we can identify each of the other points by counting units east (right) and north (up) on the grid. For example, the first stop is \(1\) block east and \(1\) block north, so it is at \((1,1)\). The next stop is \(5\) blocks to the east, so it is at \((5,1)\). After that, she traveled \(3\) blocks east and \(2\) blocks north to \((8,3)\). Lastly, she traveled \(4\) blocks north to \((8,7)\). We can label these points on the grid as in Figure \(\PageIndex{17}\).
Next, we can calculate the distance. Note that each grid unit represents \(1,000\) feet.
 From her starting location to her first stop at \((1,1)\), Tracie might have driven north \(1,000\) feet and then east \(1,000\) feet, or vice versa. Either way, she drove \(2,000\) feet to her first stop.
 Her second stop is at \((5,1)\). So from \((1,1)\) to \((5,1)\), Tracie drove east \(4,000\) feet.
 Her third stop is at \((8,3)\). There are a number of routes from \((5,1)\) to \((8,3)\). Whatever route Tracie decided to use, the distance is the same, as there are no angular streets between the two points. Let’s say she drove east \(3,000\) feet and then north \(2,000\) feet for a total of \(5,000\) feet.
 Tracie’s final stop is at \((8,7)\). This is a straight drive north from \((8,3)\) for a total of \(4,000\) feet.
Next, we will add the distances listed in Table \(\PageIndex{4}\).
From/To  Number of Feet Driven 

\((0,0)\) to \((1,1)\)  \(2,000\) 
\((1,1)\) to \((5,1)\)  \(4,000\) 
\((5,1)\) to \((8,3)\)  \(5,000\) 
\((8,3)\) to \((8,7)\)  \(4,000\) 
Total  \(15,000\) 
The total distance Tracie drove is \(15,000\) feet, or \(2.84\) miles. This is not, however, the actual distance between her starting and ending positions. To find this distance, we can use the distance formula between the points \((0,0)\) and \((8,7)\).
\[\begin{align*} d&= \sqrt{{(08)}^2+{(70)}^2}\\ &= \sqrt{64+49}\\ &= \sqrt{113}\\ &= 10.63 \text{ units} \end{align*}\]
At \(1,000\) feet per grid unit, the distance between Elmhurst, IL, to Franklin Park is \(10,630.14\) feet, or \(2.01\) miles. The distance formula results in a shorter calculation because it is based on the hypotenuse of a right triangle, a straight diagonal from the origin to the point \((8,7)\). Perhaps you have heard the saying “as the crow flies,” which means the shortest distance between two points because a crow can fly in a straight line even though a person on the ground has to travel a longer distance on existing roadways.
Using the Midpoint Formula
When the endpoints of a line segment are known, we can find the point midway between them. This point is known as the midpoint and the formula is known as the midpoint formula. Given the endpoints of a line segment, \((x_1,y_1)\) and \((x_2,y_2)\), the midpoint formula states how to find the coordinates of the midpoint M.
\[M=\left (\dfrac{x_1+x_2}{2}, \dfrac{y_1+y_2}{2} \right )\]
A graphical view of a midpoint is shown in Figure \(\PageIndex{18}\). Notice that the line segments on either side of the midpoint are congruent.
Example \(\PageIndex{7}\): Finding the Midpoint of the Line Segment
Find the midpoint of the line segment with the endpoints \((7,−2)\) and \((9,5)\).
Solution
Use the formula to find the midpoint of the line segment.
\[\begin{align*} \left (\dfrac{x_1+x_2}{2},\dfrac{y_1+y_2}{2} \right )&= \left (\dfrac{7+9}{2},\dfrac{2+5}{2} \right )\\ &= \left (8,\dfrac{3}{2} \right ) \end{align*}\]
Exercise \(\PageIndex{4}\)
Find the midpoint of the line segment with endpoints \((−2,−1)\) and \((−8,6)\).
 Answer

\(\left (5,\dfrac{5}{2} \right )\)
Example \(\PageIndex{8}\): Finding the Center of a Circle
The diameter of a circle has endpoints \((−1,−4)\) and \((5,−4)\). Find the center of the circle.
Solution
The center of a circle is the center, or midpoint, of its diameter. Thus, the midpoint formula will yield the center point.
\[\begin{align*} \left (\dfrac{x_1+x_2}{2},\dfrac{y_1+y_2}{2} \right )&= \left (\dfrac{1+5}{2},\dfrac{44}{2}) \right )\\ &= \left (\dfrac{4}{2},\dfrac{8}{2} \right )\\ &= (2,4) \end{align*}\]
Media
Access these online resources for additional instruction and practice with the Cartesian coordinate system.
1. Plotting points on the coordinate plane
2. Find x and y intercepts based on the graph of a line
Key Concepts
 We can locate, or plot, points in the Cartesian coordinate system using ordered pairs, which are defined as displacement from the \(x\)axis and displacement from the \(y\)axis. See Example.
 An equation can be graphed in the plane by creating a table of values and plotting points. See Example.
 Using a graphing calculator or a computer program makes graphing equations faster and more accurate. Equations usually have to be entered in the form \(y=\)_____. See Example.
 Finding the \(x\) and \(y\)intercepts can define the graph of a line. These are the points where the graph crosses the axes. See Example.
 The distance formula is derived from the Pythagorean Theorem and is used to find the length of a line segment. See Example and Example.
 The midpoint formula provides a method of finding the coordinates of the midpoint dividing the sum of the \(x\)coordinates and the sum of the \(y\)coordinates of the endpoints by \(2\). See Example and Example.
Contributors and Attributions
Jay Abramson (Arizona State University) with contributing authors. Textbook content produced by OpenStax College is licensed under a Creative Commons Attribution License 4.0 license. Download for free at https://openstax.org/details/books/precalculus.